Fall Specials
Thread Starter
Teching In
Joined: Aug 2002
Posts: 10
Likes: 0
From: Michigan
Fall Specials Hey guys and gals,
How about some fall specials to get ready for your winter projects.
LT1 Specials
518SCANLT1 $229.00
The most popular LT1 scan tool
1745280 $135.00
Edelbrock's tourque arm for the F-body
Very nice, and strong. Excellent upgrade for the money
40457-3010-1 $199.99
K&N FIPK kit. Completer cold air induction
*******LS1 specials*******
We are proud to announce that we have Lunati engine parts available for the LS1
465EA035-382 $3299.00
382 cid stroker kit
3.898 Bore, 4" stroke, 6.125" Rod length
4340 forged crank, forged pistons, Pro billet Rods
465JO711EN $1920.00
4"Stroke 4340 crank for 6.125" rods
465JU711EN $1960.00
4.125" Stroke crank for 6.125" rods
465LTE9 $925.00
Pro billet 6.125" Rods
310300-111 $479.00
Holley / Lingenfelter Aluminum intake manifold
1745280 $135.00
Edelbrock's tourque arm for the F-body
Very nice, and strong. Ecellent upgrade for the money
518LS1SCAN
Self contained scan tool for the LS1 $299.00
518LS1TIMETUNE $259.00
Timing computer for the LS1.
Features, base and WOT timing adjustments for all motor vehicles.
On board Nitrous controller with timing retard, time delay, and trigger for the system. Can also be used with Superchargers / Turbos too!
Buy a LS1SCAN and Timing controller together for $540.00
Phone orders only 888-293-7267 Visa / MC / Discover
Ask for Kevin or Dave.
Free shipping, Max handling charger is $8.99
Thanks
How about some fall specials to get ready for your winter projects.
LT1 Specials
518SCANLT1 $229.00
The most popular LT1 scan tool
1745280 $135.00
Edelbrock's tourque arm for the F-body
Very nice, and strong. Excellent upgrade for the money
40457-3010-1 $199.99
K&N FIPK kit. Completer cold air induction
*******LS1 specials*******
We are proud to announce that we have Lunati engine parts available for the LS1
465EA035-382 $3299.00
382 cid stroker kit
3.898 Bore, 4" stroke, 6.125" Rod length
4340 forged crank, forged pistons, Pro billet Rods
465JO711EN $1920.00
4"Stroke 4340 crank for 6.125" rods
465JU711EN $1960.00
4.125" Stroke crank for 6.125" rods
465LTE9 $925.00
Pro billet 6.125" Rods
310300-111 $479.00
Holley / Lingenfelter Aluminum intake manifold
1745280 $135.00
Edelbrock's tourque arm for the F-body
Very nice, and strong. Ecellent upgrade for the money
518LS1SCAN
Self contained scan tool for the LS1 $299.00
518LS1TIMETUNE $259.00
Timing computer for the LS1.
Features, base and WOT timing adjustments for all motor vehicles.
On board Nitrous controller with timing retard, time delay, and trigger for the system. Can also be used with Superchargers / Turbos too!
Buy a LS1SCAN and Timing controller together for $540.00
Phone orders only 888-293-7267 Visa / MC / Discover
Ask for Kevin or Dave.
Free shipping, Max handling charger is $8.99
Thanks
Launching!
Joined: Sep 2002
Posts: 238
Likes: 0
From: Warren, mi
Re: ** FALL SPECIALS ** November 29th is the LAST day <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<small>[ November 04, 2002, 04:16 PM: Message edited by: Dave@Ramchargers ]</small>
<small>[ November 04, 2002, 04:16 PM: Message edited by: Dave@Ramchargers ]</small>
Launching!
Joined: Sep 2002
Posts: 238
Likes: 0
From: Warren, mi
Re: ** FALL SPECIALS ** </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by dand35th:
<strong>can you guys do anything for the Lunati kit with 4.03 pistons for the 6.0 block for 42???</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Im sure i could get you anything you want, however the kit is the kit. You would have to buy the crank, rods and pistons seperate. I do not have an exact price on a 4.03 piston, however i will look into it for you.
<strong>can you guys do anything for the Lunati kit with 4.03 pistons for the 6.0 block for 42???</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Im sure i could get you anything you want, however the kit is the kit. You would have to buy the crank, rods and pistons seperate. I do not have an exact price on a 4.03 piston, however i will look into it for you.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Launching!
Joined: Sep 2002
Posts: 238
Likes: 0
From: Warren, mi
Re: ** FALL SPECIALS ** Dand35th,
If you wanted a 4.030 piston i believe i could set you up for about $615.00 and we would normally sell them for around $675.00 (give or take).
Theblur,
Lunati uses ARP fasteners
Chad,
I only carry the Holley/Weiand Intake, which is on special for $479.00.
If you wanted a 4.030 piston i believe i could set you up for about $615.00 and we would normally sell them for around $675.00 (give or take).
Theblur,
Lunati uses ARP fasteners
Chad,
I only carry the Holley/Weiand Intake, which is on special for $479.00.
Launching!
Joined: Sep 2002
Posts: 238
Likes: 0
From: Warren, mi
Re: ** FALL SPECIALS ** The rods are Super Lights.
The cranks themselves need to be balanced for whatever combo your goin to run. As far as i know the kit's are balanced with the componets that come in the kit, but i will verify this because the catalog does not specify like it does with the other kits.
The cranks themselves need to be balanced for whatever combo your goin to run. As far as i know the kit's are balanced with the componets that come in the kit, but i will verify this because the catalog does not specify like it does with the other kits.
TECH Enthusiast
Joined: Jul 2002
Posts: 544
Likes: 0
From: Lockport,IL
Re: ** FALL SPECIALS ** </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Wicked ls 1:
<strong>How does the autoscan tool work is it like autotap? will it give readings for knock retard while racing?????</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">?????????
<strong>How does the autoscan tool work is it like autotap? will it give readings for knock retard while racing?????</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">?????????
Launching!
Joined: Sep 2002
Posts: 238
Likes: 0
From: Warren, mi
Re: ** FALL SPECIALS ** </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Wicked ls 1:
<strong> </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Wicked ls 1:
<strong>How does the autoscan tool work is it like autotap? will it give readings for knock retard while racing?????</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">?????????</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">you mean the scanmaster?
here
http://www.ramchargers.com/RamNews/Translator/index.htm
<small>[ November 07, 2002, 08:18 AM: Message edited by: Dave@Ramchargers ]</small>
<strong> </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Wicked ls 1:
<strong>How does the autoscan tool work is it like autotap? will it give readings for knock retard while racing?????</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">?????????</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">you mean the scanmaster?
here
http://www.ramchargers.com/RamNews/Translator/index.htm
<small>[ November 07, 2002, 08:18 AM: Message edited by: Dave@Ramchargers ]</small>
