Jet-Hot Long Tubes
#1
Teching In
Thread Starter
Join Date: Aug 2002
Location: Bridgeport, PA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Those of you familiar with the board have seen me post this before - but here it is again: we have made longtubes for the 98-02 Fbodies. They have 1 3/4" primaries with 3" collectors made of 16 gauge tubes, 3/8" thick flanges. Of course they are coated in & out with our Sterling finish.
NEW TWIST - we will have headers with emissions fitting specifically for the 2000 car, as well as a version for 01 & 02.
We do still have the emissions version for 98-99 and a non-emissions version as well.
Prices: $511 for any set with the emissions tubes including shipping and handling within the 48 states. If you go for the non-emission version price is $506.
Delivery: We have the offroads ready to go, and the 98-99s can ship within a couple days of you placing an order. The 01-02s will ship on or about June 11 and the 2000 model around the 18th. All orders are sent via FedEx ground unless you specify otherwise and are sent from our Tempe Arizona facility.
I think that covers the bases, but if not feel free to drop me a line. Thanks
Todd Beiswenger
800-432-3379 x112
NEW TWIST - we will have headers with emissions fitting specifically for the 2000 car, as well as a version for 01 & 02.
We do still have the emissions version for 98-99 and a non-emissions version as well.
Prices: $511 for any set with the emissions tubes including shipping and handling within the 48 states. If you go for the non-emission version price is $506.
Delivery: We have the offroads ready to go, and the 98-99s can ship within a couple days of you placing an order. The 01-02s will ship on or about June 11 and the 2000 model around the 18th. All orders are sent via FedEx ground unless you specify otherwise and are sent from our Tempe Arizona facility.
I think that covers the bases, but if not feel free to drop me a line. Thanks
Todd Beiswenger
800-432-3379 x112
#4
Super Moderator
iTrader: (9)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Todd....was wondering if you could fit a traditional header exhaust flanger on the ends of the collectors and jet hot the entire header?
I want to be ablt to bolt on some header mufflers for occasional street driving, and be able to drop them for the track in a couple minutes. Let me know what you think. These would be "no emissions" models.
I want to be ablt to bolt on some header mufflers for occasional street driving, and be able to drop them for the track in a couple minutes. Let me know what you think. These would be "no emissions" models.