Everyday Is "Black Friday" At TBYRNE Motorsports!
11-29-2007, 02:11 PM
#21
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
We have discounts available for the complete line of McLeod clutch assemblies. Doesn't matter what kind of vehicle it's for. If they make it, we sell it!
McLeod Industries is a supplier to MOPAR Performance, Ford Motor Co., Roush, Saleen for both his Mustangs and S7s, and they designed the flywheels for the 2000 Cobra R, and 2003-4 Cobras. When Ford was designing and building the Ford GT prototype they went McLeod Industries, for the clutch.
Pricing is lower than we are allowed to advertise so we have to ask that you give us a call at 1-877-4-TBYRNE (1-877-482-9763) or e-mail tbyrne@tbyrne.com to receive a quote. Please let us know what kind of vehicle you would like to use this for. Clutch info can be seen in the Transmission sections of our website along with on McLeod's website.
Have a great day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR WEEKLY SPECIALS! INSTALLATION SPECIALS AVAILABLE!
McLeod Industries is a supplier to MOPAR Performance, Ford Motor Co., Roush, Saleen for both his Mustangs and S7s, and they designed the flywheels for the 2000 Cobra R, and 2003-4 Cobras. When Ford was designing and building the Ford GT prototype they went McLeod Industries, for the clutch.
Pricing is lower than we are allowed to advertise so we have to ask that you give us a call at 1-877-4-TBYRNE (1-877-482-9763) or e-mail tbyrne@tbyrne.com to receive a quote. Please let us know what kind of vehicle you would like to use this for. Clutch info can be seen in the Transmission sections of our website along with on McLeod's website.
Have a great day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR WEEKLY SPECIALS! INSTALLATION SPECIALS AVAILABLE!
12-02-2007, 02:35 PM
#22
TECH Enthusiast
iTrader: (2)
Join Date: Apr 2005
Location: cleveland/dayton/cincinnati, ohio
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
Can i get some prices on these items.
12 bolt with ABS no TCS ready to bolt in. Tru Trac posi. can i upgrade to a 12 bolt girdle and stud kit. controll arm relocation brackets.
earls solo bleeders
earls SS lines
maganaflow catback
hooker cat back
pro 5.0
I'm sure i forgot something, so i'll bug you again later.
12 bolt with ABS no TCS ready to bolt in. Tru Trac posi. can i upgrade to a 12 bolt girdle and stud kit. controll arm relocation brackets.
earls solo bleeders
earls SS lines
maganaflow catback
hooker cat back
pro 5.0
I'm sure i forgot something, so i'll bug you again later.
12-06-2007, 09:42 AM
#24
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
It's been awhile since we've done anything with the FAST 90mm intake manifolds. This special will be running until Thursday, December 20th -
ENGINEERING
FAST™ assembled a team of some of the best manifold experts in the country, including Keith Wilson of NASCAR and NHRA fame, with the goal of making the finest new manifold ever built. We developed a unique three- piece design that allows you access to every inch of the manifold. The middle and upper shells can be changed to allow for additional engine modifications, like a FAST™ 90mm throttle body. Runners can be match ported. They even included witness grooves to indicate how much material you can remove. They also engineered in unparalleled performance. Now you don’t have to sacrifice low end torque to gain horsepower!
To make the LSX™ a true bolt on product, it is made to fit under a stock hood and uses all factory hardware, fuel lines and linkages. However, the runners were redesigned to increase velocity and volume of airflow by moving air more efficiently. The LSX™’s longer, tapered runners allow it to gain top end horsepower without sacrificing low-end torque. With 25% more plenum volume, each runner is allowed to draw from less turbulent air. As the air enters the runners at the bell mouth, the angles are redesigned for better runner inlet transition. The throttle body is specially angled for improved plenum flow. For all of these reasons, you can expect up to 20 more bolt on horsepower and 15 more foot-pounds of torque**.
As if increasing horsepower & torque weren't enough, the team then designed in some special features to allow you to make further refinements to your engine. Special bosses are designed into the LSX to accommodate nitrous oxide nozzles and these bosses are placed at optimal angles. We've already mentioned you can port the LSX, but there's even a place for a burst panels to be installed to help prevent engine damage caused by nitrous backfires or boost pressure overload.
ADVANCED POLYMER
The team decided that even though using an advanced polymer material would be more challenging, the benefits far out weighed all other materials. They selected "Amodel" because it is 20% stronger and 25% stiffer than the nylon used by the O.E.. It is also a remarkable 127% lighter than aluminum [11lbs. vs. 26 lbs.]. Even more important is the heat advantage. As an engine heats up to its operating temperature, a metal manifold absorbs that heat, which in turn causes it to preheat the air that enters the cylinders. This process, called heat sink, robs you of horsepower. Amodel does not absorb engine heat but instead acts as a heat shield, allowing much cooler denser air into the cylinders. The result is a lighter, stronger, stiffer manifold with built in horsepower gains from the material alone.
30-54003 F.A.S.T. LSX 90mm intake manifold
3054019 90mm Throttle Body w/TPS cable drive only
Package price - $1089.99 Please note this price when you order.
Orders can be placed online or by giving us a call at 1-877-482-9763.
Have a great day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
ENGINEERING
FAST™ assembled a team of some of the best manifold experts in the country, including Keith Wilson of NASCAR and NHRA fame, with the goal of making the finest new manifold ever built. We developed a unique three- piece design that allows you access to every inch of the manifold. The middle and upper shells can be changed to allow for additional engine modifications, like a FAST™ 90mm throttle body. Runners can be match ported. They even included witness grooves to indicate how much material you can remove. They also engineered in unparalleled performance. Now you don’t have to sacrifice low end torque to gain horsepower!
To make the LSX™ a true bolt on product, it is made to fit under a stock hood and uses all factory hardware, fuel lines and linkages. However, the runners were redesigned to increase velocity and volume of airflow by moving air more efficiently. The LSX™’s longer, tapered runners allow it to gain top end horsepower without sacrificing low-end torque. With 25% more plenum volume, each runner is allowed to draw from less turbulent air. As the air enters the runners at the bell mouth, the angles are redesigned for better runner inlet transition. The throttle body is specially angled for improved plenum flow. For all of these reasons, you can expect up to 20 more bolt on horsepower and 15 more foot-pounds of torque**.
As if increasing horsepower & torque weren't enough, the team then designed in some special features to allow you to make further refinements to your engine. Special bosses are designed into the LSX to accommodate nitrous oxide nozzles and these bosses are placed at optimal angles. We've already mentioned you can port the LSX, but there's even a place for a burst panels to be installed to help prevent engine damage caused by nitrous backfires or boost pressure overload.
ADVANCED POLYMER
The team decided that even though using an advanced polymer material would be more challenging, the benefits far out weighed all other materials. They selected "Amodel" because it is 20% stronger and 25% stiffer than the nylon used by the O.E.. It is also a remarkable 127% lighter than aluminum [11lbs. vs. 26 lbs.]. Even more important is the heat advantage. As an engine heats up to its operating temperature, a metal manifold absorbs that heat, which in turn causes it to preheat the air that enters the cylinders. This process, called heat sink, robs you of horsepower. Amodel does not absorb engine heat but instead acts as a heat shield, allowing much cooler denser air into the cylinders. The result is a lighter, stronger, stiffer manifold with built in horsepower gains from the material alone.
30-54003 F.A.S.T. LSX 90mm intake manifold
3054019 90mm Throttle Body w/TPS cable drive only
Package price - $1089.99 Please note this price when you order.
Orders can be placed online or by giving us a call at 1-877-482-9763.
Have a great day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
12-06-2007, 09:53 AM
#25
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
TBYRNE Motorsports carries the complete line of Nitrous Express kits and we have them ALL on sale! It doesn't matter what kind of car you'd like to put one on, we can provide you with a very good deal. This also applies to all of their accessories, GEN-X kits, progressive controllers ect...
Pricing is lower than they would like to see us advertise so we have to ask you to give us a call at 1-877-4-TBYRNE (1-877-482-9763) or e-mail tbyrne@tbyrne.com to receive a quote.
Product info can be seen on our website and also on the Nitrous Express site.
Have a great day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
Pricing is lower than they would like to see us advertise so we have to ask you to give us a call at 1-877-4-TBYRNE (1-877-482-9763) or e-mail tbyrne@tbyrne.com to receive a quote.
Product info can be seen on our website and also on the Nitrous Express site.
Have a great day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
12-12-2007, 02:20 PM
#27
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
DiabloSport will be having a price increase on January 1st so our current discounted price for the Predator programmer won't be around much longer!
Pricing is lower than we are allowed to advertise so we have to ask that you give us a call at 1-877-482-9763 or e-mail tbyrne@tbyrne.com to receive a quote.
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
Pricing is lower than we are allowed to advertise so we have to ask that you give us a call at 1-877-482-9763 or e-mail tbyrne@tbyrne.com to receive a quote.
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
12-12-2007, 10:06 PM
#28
TECH Fanatic
iTrader: (9)
Join Date: Aug 2007
Location: Rocky Mtn thin air & snow...
Posts: 1,237
Likes: 0
Received 1 Like
on
1 Post
McLeod Industries is a supplier to MOPAR Performance, Ford Motor Co., Roush, Saleen for both his Mustangs and S7s, and they designed the flywheels for the 2000 Cobra R, and 2003-4 Cobras. When Ford was designing and building the Ford GT prototype they went McLeod Industries, for the clutch.
Hmmm. Not sure if you've caught this or not, but this site is largely GM-based, & most of us don't have much use for F*rd stuff... Yeah, I'm messin' with ya.
When time allows, I'll be calling to get a price on the: SINGLE DISC ASSY W/ MC
74002-07 PRESSURE PLATE, DISC, STEEL FLYWHEEL & MASTER CYL
(from McLeod's website)
(OR, you could just PM it to me...) Thanks.
12-23-2007, 04:51 PM
#29
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
We have a bunch of f-body products listed on eBay. Some are old stock, discontinued items and overstock. More products will be listed over the next week.
Hurst Shifter 1993-'97 Camaro/Firebird - 391-0061
TransGO 4L60e Shift Kit - 4L60E PSK
SLP LS1/LS6 Double Roller Timing Chair Set - 55000
SLP MAF Sensor 1998-'00 LS1 - 23060
Harmonic Balancer/Underdrive Pulley, 1998-02 LS1 f-body
SLP Performance Air-Box Lid SLP Chevy/Pontiac 21045
SLP Brake-Control Package, 1998-02 Camaro/Firebird
Taylor 409 Pro-Race Wires - LT1 Camaro/Firebird
Nitrous Express GENX-2 Kit
NOS Remote Nitrous Bottle Opener #16058
You can see the listing at http://www.tbyrnemotorsports.com/ebayproducts.htm.
Supplies are limited so don't miss out!
Happy Holidays!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
Hurst Shifter 1993-'97 Camaro/Firebird - 391-0061
TransGO 4L60e Shift Kit - 4L60E PSK
SLP LS1/LS6 Double Roller Timing Chair Set - 55000
SLP MAF Sensor 1998-'00 LS1 - 23060
Harmonic Balancer/Underdrive Pulley, 1998-02 LS1 f-body
SLP Performance Air-Box Lid SLP Chevy/Pontiac 21045
SLP Brake-Control Package, 1998-02 Camaro/Firebird
Taylor 409 Pro-Race Wires - LT1 Camaro/Firebird
Nitrous Express GENX-2 Kit
NOS Remote Nitrous Bottle Opener #16058
You can see the listing at http://www.tbyrnemotorsports.com/ebayproducts.htm.
Supplies are limited so don't miss out!
Happy Holidays!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
12-26-2007, 10:15 AM
#30
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
We carry the complete line of B&B TriFlo exhausts and have discounts available for every system that they produce. Pricing is lower than they would like to see us advertise so we have to ask that you give us a call at 1-877-482-9763 or e-mail tbyrne@tbyrne.com to receive a quote. Please let us know the year/model of your vehicle and the part # of the exhaust that your interested in if you have it. Info can be seen in the Exhaust sections of our website and also on the B&B site - http://www.bbexhaust.com .
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
Have a good day!
TBYRNE MOTORSPORTS LLC
ORDER LINE - 1-877-4-TBYRNE
E-MAIL - tbyrne@tbyrne.com
CHECK OUR WEBSITE FOR OUR EVERYDAY LOW PRICE POLICY!
