FAST 92/PTM 92 Combo Special!
#21
TECH Addict
iTrader: (24)
Joined: Oct 2006
Posts: 2,608
Likes: 0
From: Webb City, MO...out in the garage
does that ~$1100+shipping include new gaskets and the stainless hardware i've heard the 92mm's come with?
and do these models still have potential for some serious port work like the 90mm's? or did they REALLY revise the design?
and do these models still have potential for some serious port work like the 90mm's? or did they REALLY revise the design?
#23
These will come with all the stainless hardware. We are looking to see how much porting can be done. As soon as I get some more 90mm in stock, I will check to see if they can be ported to accept the 92mm TB. I would guess they will but I just want to confirm before saying they will.
#27
They are in stock and ready to go. Currently I don't have a 92mm TB for the Vettes. We have been running the LS2 TB with the 90mm intake but we are still looking at a TB for the vette guys with the 92mm setup.
I did recieve an email from FAST saying that the 92mm was indeed replacing the 90mm which as now been discontinued. I am going to try and confirm that for sure today.
Jon
I did recieve an email from FAST saying that the 92mm was indeed replacing the 90mm which as now been discontinued. I am going to try and confirm that for sure today.
Jon
#36
Naaa, my damn camera died this weekend. Basically, on the fast 90, the very edge of the tb gasket receiver groove is 95mm. I opened the neck up to that point leaving just a hint of a lip inside. Then cleaned it up and smoothed it working my way up to 600 grit. I used a thin film of silicon to make sure it sealed. Works great!