Hand Ported Cylinder Head Specials at MTI!!
03-01-2008, 11:46 AM
#1
Launching!
Thread Starter
iTrader: (3)
Join Date: Jan 2007
Location: Houston, TX
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Hand Ported Cylinder Head Specials at MTI!! Since Uncle Sam is kickin us all back a little spending money and we have had a chance to put some cylinder heads on the shelf I figured it would be a good time to run a special for members...
The special is on our most popular head, the Stage IIE.
Stage IIE LS1 Cylinder Heads: Complete hand porting of intake and exhaust runners for excellent flow volume & air speed with major bowl work performed. Ferrea 2.02" stainless one piece intake valves, and 1.56" exhaust valves are used in the factory valve seats. High performance dual valve springs coupled with our custom lightweight titanium retainers and specially machined spring cups offer the most stable, and reliable valvetrain. This is an excellent street cylinder head with flow numbers exceeding well over 300 CFM on the intake runner and 210+ on the exhaust side. Each set of cylinder heads will come with their own individual flow sheet. (Heads can be milled to customer's application)
Here is your chance to own a set of tried and true MTI hand ported cylinder heads at a largely reduced price and with no wait. Flow sheets and pictures of our porting can be found on our website.
LS1 Castings are $1495 Shipped!
LS6 Castings are $1695 Shipped!
The special is on our most popular head, the Stage IIE.
Stage IIE LS1 Cylinder Heads: Complete hand porting of intake and exhaust runners for excellent flow volume & air speed with major bowl work performed. Ferrea 2.02" stainless one piece intake valves, and 1.56" exhaust valves are used in the factory valve seats. High performance dual valve springs coupled with our custom lightweight titanium retainers and specially machined spring cups offer the most stable, and reliable valvetrain. This is an excellent street cylinder head with flow numbers exceeding well over 300 CFM on the intake runner and 210+ on the exhaust side. Each set of cylinder heads will come with their own individual flow sheet. (Heads can be milled to customer's application)
Here is your chance to own a set of tried and true MTI hand ported cylinder heads at a largely reduced price and with no wait. Flow sheets and pictures of our porting can be found on our website.
LS1 Castings are $1495 Shipped!
LS6 Castings are $1695 Shipped!
