Gauge Cluster Not Working
09-30-2010, 10:25 AM
#1
On The Tree
Thread Starter
iTrader: (22)
Join Date: Apr 2006
Location: Greensboro, NC
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Gauge Cluster Not Working I've got a 1999 Camaro I've been building. I just got the motor in and it fired up on the first try.
All the grounds on the backside of the block are intact. I doubled checked all the fuses, everything looks right.
Could there be a bad ground somewhere? I have another gauge cluster, should I swap them out?
All the lights work on the gauges.
The odometer is showing up.
The speedo is stuck at 110 mph.
The oil pressure is pegged at 80+.
The voltage is pegged.
The fuel gauge is at empty.
The tach is at bottomed out.
All the grounds on the backside of the block are intact. I doubled checked all the fuses, everything looks right.
Could there be a bad ground somewhere? I have another gauge cluster, should I swap them out?
All the lights work on the gauges.
The odometer is showing up.
The speedo is stuck at 110 mph.
The oil pressure is pegged at 80+.
The voltage is pegged.
The fuel gauge is at empty.
The tach is at bottomed out.
