Auto meter shift light
#1
10 Second Club
Thread Starter
Join Date: Nov 2004
Location: CHI-TOWN
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Auto meter shift light
https://www.autometer.com/2-1-16-dig-pro-shift-1-stage-phantom.html
anyony running this one? Install pictures? Anything? I did a search and came up with nothing
anyony running this one? Install pictures? Anything? I did a search and came up with nothing
Last edited by Chased; 02-13-2018 at 05:11 AM. Reason: Edit
#2
TECH Addict
iTrader: (7)
I have one. I got it with their 2 pod a-pillar addon. It was pretty easy to install. You just supply power, and tap into the TAC wire at the ECU.
I mounted two fuse blocks and a grounding block on the plastic cover under the steering wheel, and used that to wire BAT and ACC power for the AFR guage and the tac/shiftlight.
BAT power and tac signal wires were routed through the firewall grommet behind the ECU.
ACC power came from an open spot on the factory fuse block.
I might have a pic of it all installed. I will look.
I mounted two fuse blocks and a grounding block on the plastic cover under the steering wheel, and used that to wire BAT and ACC power for the AFR guage and the tac/shiftlight.
BAT power and tac signal wires were routed through the firewall grommet behind the ECU.
ACC power came from an open spot on the factory fuse block.
I might have a pic of it all installed. I will look.