I got killed twice in one night
#1
TECH Enthusiast
Thread Starter
I got killed twice in one night
Lastnight at the local 1/8 mile (countyline in miami)track I raced two stangs. 1st race was against a late 80's -early 90's stang my time was rt:.222 his rt: .323 mine 60ft:2.117 his 60ft:1.810 mine trap:81.5 his 83.3 mine elapsed: 8.856 his elapsed: 8.112. His car had intake, exhaust, manual transmission and spray.
2nd race against 07 stang gt times were my rt: .287 his rt: .007 mine 60ft: 2.187 his 60ft: 2.197 mine trap:81.2 his trap:81.3 mine elapsed:8.952 his elapsed:8.844. His car had intake,full exhuast and manual transmission.
Now is this roughly what stock LS1 T/A should run? I had a ton of fun.
2nd race against 07 stang gt times were my rt: .287 his rt: .007 mine 60ft: 2.187 his 60ft: 2.197 mine trap:81.2 his trap:81.3 mine elapsed:8.952 his elapsed:8.844. His car had intake,full exhuast and manual transmission.
Now is this roughly what stock LS1 T/A should run? I had a ton of fun.
#2
11 Second Club
iTrader: (3)
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
My 02 LS1 A4 went 8.70@83.86 I have.GU2 273 gears. My mods are SLP Lid,K&N,Smooth Bellows,Delphi 85mm maf,Throttle body bypass, Now I have added SLP Y,SLP Loudmouth 1,UMI Strut Tower Brace,UMI Weld In subframe connectors,I took my spare tire and jack out.But I havent ran it yet..
Next on my list is 342/373 gears,160 thermostat,DR's,Tune. See how it runs after them mods then it will be Longtube headers,ORY. see how it run with them then Iam doing 3200-3600 Stall...
Next on my list is 342/373 gears,160 thermostat,DR's,Tune. See how it runs after them mods then it will be Longtube headers,ORY. see how it run with them then Iam doing 3200-3600 Stall...
Last edited by 1Bad97WS-6; 01-26-2010 at 09:23 PM.
#4
TECH Enthusiast
Thread Starter
I was told that for a f-body with 3.23's my times were still to slow. Maybe my math is wrong but isn't the math 1.57x8.856= 13.90. Is it my rt or 60ft. that's killing me. Any input will help.
Trending Topics
#11
TECH Apprentice
iTrader: (15)
Join Date: Mar 2009
Location: Greenville, SC
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
my lid/tb/catback A4 2.73's went 8.7@81 with a 2.0 60ft on street tires. Just work on that launch a little bit and that 60ft will go down. I went with a very consecutive launch with rolling out of the hole a little then gunning it, was just enough to get traction after a good burnout.
#12
11 Second Club
iTrader: (3)
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
This is what I have found 1/8 to 1/4 times.. 8.85 is a 13.81.
http://www.centralfloridastreetcars....conversion.htm
This is what my run looked like..
RT-.557 this is on a .500 tree.
60ft-1.995
1/8-8.70
MPH-83.86
Now with SLP Y,SLP Loudmouth 1 Catback Iam hoping to run atleast 8.5X in the 1/8. When I do gears Iam hoping to pickup atleast .2 and when I put on DR's,160,Tune Iam hoping for another .2 in the 1/8th..Stall and LT's/ORY is in the near future after I do what I have listed above..
http://www.centralfloridastreetcars....conversion.htm
This is what my run looked like..
RT-.557 this is on a .500 tree.
60ft-1.995
1/8-8.70
MPH-83.86
Now with SLP Y,SLP Loudmouth 1 Catback Iam hoping to run atleast 8.5X in the 1/8. When I do gears Iam hoping to pickup atleast .2 and when I put on DR's,160,Tune Iam hoping for another .2 in the 1/8th..Stall and LT's/ORY is in the near future after I do what I have listed above..
Last edited by 1Bad97WS-6; 01-27-2010 at 06:02 PM.
#14
Well I thought the mustangs can keep up with us until 3rd, Thats just what I've been reading on most forums. I have yet to come across a mustang that wanted to race. I've only been the chase vehicle/Camera vehicle for a race between a Fox body mustang and an Import.