TT C6 on low boost (vid)
especially when you hit full boost!!!!
10-04-2011, 03:46 AM
#23
nothing special really... just a darton sleeved LS2, 427ci, and probably RPM T6060 built transmission and rear end.... twin turbo kit going to be the same except I am going to heat wrap all these pipes. and I am putting a real boost controller. eboost2. the one I had was a junk. when we set it at 14psi. it will creep out to 17psi... so I throw that one out and now running on the wastgates springs only.....
10-04-2011, 04:12 AM
#24
Teching In
Join Date: Mar 2007
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Yea I noticed and I did mention it to the tuner. he said its ok on E85. and since I am rebuilding it in few weeks I thought I will just leave it as it is. I will get a boost controller in few days and when I take the boost up, I will make sure the tune is right with no problems...... Thanks Fran
Edit: there is damage to the engine already, thats why I kinda dont care. I know I shouldnt be driving it hard, but you know how it feels driving a boosted vette haha. we did a compression test and it was around 120-125 on all cylinders!!
Edit: there is damage to the engine already, thats why I kinda dont care. I know I shouldnt be driving it hard, but you know how it feels driving a boosted vette haha. we did a compression test and it was around 120-125 on all cylinders!!
10-04-2011, 04:25 AM
#25
also the shop that did the compression test been building engines for 20years I am sure they know how to do a compression test? I dont know!
