HioSSilver

iTrader: (8)

I think he said 105. He olny ran 107-108 with his current mods, indicating Mach's are definitly not roll cars

99peweterls1

iTrader: (1)

Your 102% right. BUT, would you not say these cars are equally modded or close? And (just a recap) this all started with saying 6.1 hemi cars are slow (they're not). Then they went back and forth with stoppy Claiming machs are faster using his e/t. Now the bottom line is this, the 6.1l srt8 cars are not slow, thats speaks for itself.To end all of this I'm asking with a grown up answer as to which car is faster stone stock and mod to mod?

Edit: I missed the part where you mentioned stoppy's e/t and mph.
Let's not beat around the bush kev knows what he's doing when it comes to mustangs and can drive. So would 13.2 @ 106 not be on the lower side of the averages of mach 1's with said mods? But is still part of the average nonetheless which is why I used a range of numbers that I know bone stock 6.1 cars run. Do you agree?

Irunelevens

He was trying to get a rise out of him...it worked . And I'd say that the two cars stock run very similar times on average, with the edge going to the SRT-8. And they generally trap higher.

99peweterls1

iTrader: (1)

I understand that... lol The point to be had still stands and thanks for the educated answer. Some others need to chime in, I wanna see them type it lmao

NiteRiderWS6

iTrader: (2)

The point of this thread is to make stop shut his mouth that he runs to much. This all came about from a thread on SVTP 2 days ago about this same mach running a challenger SRT8

"I can't help Dodges are slow

And LT1s....
Last edited by Stopsign32v; Yesterday at 08:58 PM."

"My stock Mach 1 ran 12.5, I swear. Factory freak I guess..."

"When are you going to own a fast car? I wonder if anyone here remembers your white T/A with chrome 20" wheels on it."

"Who's panties are in a bunch? I've got a hand full of mods and would wipe the floor with any stock Challenger or Charger and I have about half the motor. If you ask me it's the other way around with the panties. lol"

Well I just wiped the floor with a 5-Speed exhaust mach and I have +1000lbs and 22's.....

NiteRiderWS6

iTrader: (2)

I tried to but he didn't want to brake anything so we just stuck with the rolls.

NiteRiderWS6

iTrader: (2)

Its a T2i and I had it wedged in between the headrest lol

NiteRiderWS6

iTrader: (2)

Just talked to him yesterday hes H/C now I have no chance lol

NiteRiderWS6

iTrader: (2)

Those mods aren't making up for those Car Lengths especially on the highway. I Our highway runs were 4+ cars everytime. Ive ran full bolt on Machs many times at the 1/8th and I have never lost to one. I always out et and out trap them so I guess stopsign = evan smith

Stopsign32v

iTrader: (1)

So what did this thread prove and how do you plan to shut my mouth? You simply proved that a modded SRT8 could beat a stock Mach 1. Who didn't see that coming? All of my other posts still stand (some with a touch of sarcasm though poking fun at LT1GUY). You're really going to be butt hurt the next time I get the Mach to the track and can actually get some seat time in.

NiteRiderWS6

iTrader: (2)

The Mach 1 is a 5-Speed and has exhaust work. Mach 1's run 12.5 stock right?? Obviously not. If you think a Mach 1 with your mods will beat me your dreaming. The only advantage you have is at the 1/4 with those gears, slicks and 7K dumps. On the street you will get pulled just as I said before. 110 mph traps LOL you wont be pulling any SRT8s with my mods anytime soon....

Stopsign32v

iTrader: (1)

I'd rather run at the track, it's more fun.

88blackgt

I'm confused unless you only roll race

We both agree you'd get worked in the 1/4?

hendrixx

lolol whos the idiot that said stock mach 1s run 12.5???

an 02-04 cobra runs 12.5 at best and it is much faster than a mach 1 lol

Irunelevens

Well if you want to say "at best," the record for the '03-'04 Cobra is 12.3, IIRC.

88blackgt

You're going to have to go back and read like 30 threads to understand that

TransAmcoupe98

iTrader: (10)

Why don't you two, niterider and stopsign just run? Put some cash on it to justify the trip and settle it? I plan on doing the same with stopsign but it's a friendly run we've discussed.

NiteRiderWS6

iTrader: (2)

NiteRiderWS6

iTrader: (2)

Almost 90% of my runs are at the strip. And no I wouldn't get "worked". With my stock tires on that is...

NiteRiderWS6

iTrader: (2)

Im running a 01 Cobra from SVTP with the following

jba headers
magna flow x pipe no cats
flowmasters cat back
steeda underdrive pullies
mmr intake spacer
bbk cold air
bbk tb
egr delete
aluminum driveshaft
4.10 gears
built transmission custom valve body and shift kit
91 octane tune from gtr
nitto invo tires in the rear

don don don the plot thickens lol