LT1 vs SN95 5.0 Cobra
#23
1994-1995 GT's and Cobras had the old 5.0 small block. 1996-1998 GT's had the non-PI 2V 4.6 (2 cams), and 1996-1998 Cobras had the 4V 4.6 (4 cams). New edge GT's had the PI 2V 4.6.
#24
No way... I question 11's with a Fox body using stock iron heads(excluding TFS or Cleveland) on a stock bottom end. With the mods you listed, the odds are, it's pretty much inconceivable. With a blower on top of all that, probably. Even then, it's iffy. Stock 5L(OHV) heads, even stock GT40 iron heads... SUCK!
#26
I figured you just had the years mixed up
To anyone who was into these cars back in the mid-90's, what were people expecting from the new motor in 1996 (referring to the GT's, not the Cobras). Were they hoping for big improvements or did it go down as expected? I wasn't into cars back then so I don't remember, lol.
To anyone who was into these cars back in the mid-90's, what were people expecting from the new motor in 1996 (referring to the GT's, not the Cobras). Were they hoping for big improvements or did it go down as expected? I wasn't into cars back then so I don't remember, lol.
#28
No way... I question 11's with a Fox body using stock iron heads(excluding TFS or Cleveland) on a stock bottom end. With the mods you listed, the odds are, it's pretty much inconceivable. With a blower on top of all that, probably. Even then, it's iffy. Stock 5L(OHV) heads, even stock GT40 iron heads... SUCK!
Without looking I found this:
http://www.youtube.com/watch?v=TXT4j...ure=plpp_video
#29
TECH Fanatic
iTrader: (55)
I remember how depressed I was seeing those 94-95 Cobras run mid 14s stock back in the day which were slower than the 93 Cobras
Cars main problems were the cam,ecm,lack of gear and some weight. You can go fast with cast iron GT40s heads and I think they are much better than the Gt40P crap heads.
I have to look for my dynos/runs but I went high 11s at 122-123 MPH on street radials with GT40 stuff with a 11PSI powerjunk blower(433 my tune-479 after a Larocca tune). Not bad for back then.
Cars main problems were the cam,ecm,lack of gear and some weight. You can go fast with cast iron GT40s heads and I think they are much better than the Gt40P crap heads.
I have to look for my dynos/runs but I went high 11s at 122-123 MPH on street radials with GT40 stuff with a 11PSI powerjunk blower(433 my tune-479 after a Larocca tune). Not bad for back then.
#30
I remember how depressed I was seeing those 94-95 Cobras run mid 14s stock back in the day which were slower than the 93 Cobras
Cars main problems were the cam,ecm,lack of gear and some weight. You can go fast with cast iron GT40s heads and I think they are much better than the Gt40P crap heads.
I have to look for my dynos/runs but I went high 11s at 122-123 MPH on street radials with GT40 stuff with a 11PSI powerjunk blower(433 my tune-479 after a Larocca tune). Not bad for back then.
Cars main problems were the cam,ecm,lack of gear and some weight. You can go fast with cast iron GT40s heads and I think they are much better than the Gt40P crap heads.
I have to look for my dynos/runs but I went high 11s at 122-123 MPH on street radials with GT40 stuff with a 11PSI powerjunk blower(433 my tune-479 after a Larocca tune). Not bad for back then.
I love my ls1, but I just love mustangs and I can't help it.
#32
TECH Fanatic
iTrader: (55)
Had a flat so borrowed some skinnies to do a pass. Didn't powershift.
http://www.mk3.us/mike/stang/Mike92Lx117.mpg
http://www.mk3.us/mike/stang/Mike92Lx117.mpg
#33
Had a flat so borrowed some skinnies to do a pass. Didn't powershift.
http://www.mk3.us/mike/stang/Mike92Lx117.mpg
http://www.mk3.us/mike/stang/Mike92Lx117.mpg
#37
TECH Fanatic
iTrader: (55)
I was so disappointed when the 4.6 debuted. No parts,no power,OBD2 which we thought was the end of the world,hard to work on and the car got expensive. Mean while the Fbodies got faster....and faster. 98GT vs 98 Z28 was an embarrassment. 99 got a tad more power but still way behind not mention the more powerful and expensive Cobra was slower too. The dark days for sure....from 93 and up
#38
Captain Double Post
iTrader: (2)
yeah i agree, i had a ton of money into my 4.6 and the damn thing just didnt move, then when i looked at the cost to really get it to fly vs buying a f body, i just went and got a ss , i was happy with my ss for 2 years stock just because of that turd 4.6, one ride i would love to build is a sn95 with a 03 cobra drivetrain, i loved the look of the 94,98 stangs.my ride looked great just ran like a taxi cab
#39
10 Second Club
iTrader: (8)
I was so disappointed when the 4.6 debuted. No parts,no power,OBD2 which we thought was the end of the world,hard to work on and the car got expensive. Mean while the Fbodies got faster....and faster. 98GT vs 98 Z28 was an embarrassment. 99 got a tad more power but still way behind not mention the more powerful and expensive Cobra was slower too. The dark days for sure....from 93 and up
#40
On The Tree
Join Date: Aug 2009
Location: Wilmywood NC
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts