Neon Vs 700whp supercoupe + 600whp Cobras
#1
Teching In
Thread Starter
Join Date: Sep 2010
Location: Indianapolis Area
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Local neon. I have a date with him in the near future Im sure. Gonna need another 30whp at least. I pulled about a fender on the black cobra in this video.
Skip to 2:30.
http://youtu.be/ygme5BDGC2Q?t=2m30s
Me vs cobra
I estimate I'm around 460-470.
Skip to 2:30.
http://youtu.be/ygme5BDGC2Q?t=2m30s
Me vs cobra
I estimate I'm around 460-470.
Last edited by LightningTeg; 06-04-2012 at 06:46 PM.
#4
Teching In
Thread Starter
Join Date: Sep 2010
Location: Indianapolis Area
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
#5
12 Second Club
Join Date: Jun 2011
Location: your mums house
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
my buddy is doing the same, has the 5857 right now on 21psi cams only motor. the rods are probably shaped like bananas but the neons like that
hes going with full DCR motor and precision 6262, eventually going for 30psi i think. hopefully 650-700whp? should be a pretty ******* bad *** machine haha.
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
hes going with full DCR motor and precision 6262, eventually going for 30psi i think. hopefully 650-700whp? should be a pretty ******* bad *** machine haha.
Trending Topics
#17
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It was a hot day. I wouldn't be too upset. Too bad they were the dyno was STD rated. They typically read a little higher than SAE.