Bolt on Mach 1 vs bolt on LS1 from a roll
#83
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Are point is not to hijack these threads.....are point is your an idiot and claim you know everything. Hell now your saying you know how mach1s perform? Why......beacuse you saw one that underperformed? You think every single car in america runs just like the one you have raced? No. There are freak cars out there with very good drivers that may have ripped the doors off the same mach you raced with the same mods.....hell i have raced tons of Fbodies and they all run different man its just the way it is.
See lil...I'm not the only one that misunderstood. Not a good hit for 1st or 2nd really.
#86
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
if you think a 15mph roll is a good speed for a 342 geared ls1, you don't know anything. That might be the worst spot for that car, especially against a geared mach 1.
fwiw - I did mult races with a geared mach 1 when I had bolt ons. did 40s in first and in second and the outcome was the same every time. so from my experience, with 342s it dosen't matter if its 1st or second gear. and I had drs too, so it would hook in first.
thats all he is about man, excuses...
fwiw - I did mult races with a geared mach 1 when I had bolt ons. did 40s in first and in second and the outcome was the same every time. so from my experience, with 342s it dosen't matter if its 1st or second gear. and I had drs too, so it would hook in first.
thats all he is about man, excuses...
I would post vids but your such a bitch you wouldn't watch them. No proving nothing to you....your awesome.
#87
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
if he can drive it he'll be fine, but from the looks of things he can't.
Come on Stoppy, you've been walked by bolt-on ls's before. Tell that story again for your Ford fans on here. I think I remember you saying he pulled you good enough you thought he had a cam....lmao
Come on Stoppy, you've been walked by bolt-on ls's before. Tell that story again for your Ford fans on here. I think I remember you saying he pulled you good enough you thought he had a cam....lmao
#95
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
40 is a great speed with 3.73s, well so is 30 and 15. Good run stopsign, it's always nice seeing what the little 281 does with a decent driver and a few supporting mods. Don't listen to these guys I've never been pulled by a bolt-on fbody, and as long as you realize it's an acceleration contest, neither will you. Lol In for the next vid!
#97
TECH Apprentice
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
"BottleMach
Registered User
Garage is empty, add now
Trader Rating: 0
Join Date: Jun 2012
Location: Pa
Posts: 0
40 is a great speed with 3.73s, well so is 30 and 15. Good run stopsign, it's always nice seeing what the little 281 does with a decent driver and a few supporting mods. Don't listen to these guys I've never been pulled by a bolt-on fbody, and as long as you realize it's an acceleration contest, neither will you. Lol In for the next vid!
__________________
2004 Mach1
85mm MAF & CAI - Twin 62mm T/B - SCT Tune - Gears
Mac LT's - Mac o/r H pipe - Roush Cat-back - E-Cutouts
Dave's Nitrous Outlet custom plate 125 shot - Nano
Built by DiabloFormula Racing
13.1 @ 107 n/a 298whp @ 4.7 rpm ... FUGLY TUNE"
See what I mean?
Registered User
Garage is empty, add now
Trader Rating: 0
Join Date: Jun 2012
Location: Pa
Posts: 0
40 is a great speed with 3.73s, well so is 30 and 15. Good run stopsign, it's always nice seeing what the little 281 does with a decent driver and a few supporting mods. Don't listen to these guys I've never been pulled by a bolt-on fbody, and as long as you realize it's an acceleration contest, neither will you. Lol In for the next vid!
__________________
2004 Mach1
85mm MAF & CAI - Twin 62mm T/B - SCT Tune - Gears
Mac LT's - Mac o/r H pipe - Roush Cat-back - E-Cutouts
Dave's Nitrous Outlet custom plate 125 shot - Nano
Built by DiabloFormula Racing
13.1 @ 107 n/a 298whp @ 4.7 rpm ... FUGLY TUNE"
See what I mean?
#98
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
40 is a great speed with 3.73s, well so is 30 and 15. Good run stopsign, it's always nice seeing what the little 281 does with a decent driver and a few supporting mods. Don't listen to these guys I've never been pulled by a bolt-on fbody, and as long as you realize it's an acceleration contest, neither will you. Lol In for the next vid!
![Icon Confused](https://ls1tech.com/forums/images/smilies2/icon_confused.gif)
#99
TECH Enthusiast
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
"BottleMach
Registered User
Garage is empty, add now
Trader Rating: 0
Join Date: Jun 2012
Location: Pa
Posts: 0
40 is a great speed with 3.73s, well so is 30 and 15. Good run stopsign, it's always nice seeing what the little 281 does with a decent driver and a few supporting mods. Don't listen to these guys I've never been pulled by a bolt-on fbody, and as long as you realize it's an acceleration contest, neither will you. Lol In for the next vid!
__________________
2004 Mach1
85mm MAF & CAI - Twin 62mm T/B - SCT Tune - Gears
Mac LT's - Mac o/r H pipe - Roush Cat-back - E-Cutouts
Dave's Nitrous Outlet custom plate 125 shot - Nano
Built by DiabloFormula Racing
13.1 @ 107 n/a 298whp @ 4.7 rpm ... FUGLY TUNE"
See what I mean?
Registered User
Garage is empty, add now
Trader Rating: 0
Join Date: Jun 2012
Location: Pa
Posts: 0
40 is a great speed with 3.73s, well so is 30 and 15. Good run stopsign, it's always nice seeing what the little 281 does with a decent driver and a few supporting mods. Don't listen to these guys I've never been pulled by a bolt-on fbody, and as long as you realize it's an acceleration contest, neither will you. Lol In for the next vid!
__________________
2004 Mach1
85mm MAF & CAI - Twin 62mm T/B - SCT Tune - Gears
Mac LT's - Mac o/r H pipe - Roush Cat-back - E-Cutouts
Dave's Nitrous Outlet custom plate 125 shot - Nano
Built by DiabloFormula Racing
13.1 @ 107 n/a 298whp @ 4.7 rpm ... FUGLY TUNE"
See what I mean?
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)