Gt4urass

It was definitely a good kill man. Don't let my sarcastic comments detract from your accomplishment. I just enjoy stirring the pot with some of the locals . Looking forward to some track times once you get her dialed in.

Mavn

iTrader: (3)

Thanks man! I trapped 94 in the 1/8 with a 2.4 60' lol my time sucked *** but my trap speed was good. Going to wait for the speed eng 1 7/8 headers and y-pipe. Getting my 3.90's in the car this week! So once Those headers are available I should almost be done we'll almost be dialed in lol

redbird555

iTrader: (14)

good kill man. i would go with 3.73's or even 3.42's to keep hwy rpms down. gears dont really make a time difference with a stall mainly just drivebability. 3.42's and a 3200 stall will drive ncie keep rpms down and still give the same times as 3.90s will.

Guitar

iTrader: (9)

I'd be curious to see what your car does in the 1/4. Friends car traps around that I think in the 1/8th but runs out top end and goes around 116. My car traps 91ish with decent air and runs about 115 usually. Mines an M6, his an auto.

Why not do the TSP 1 7/8? I had a set that I was going to put on my old SS before it got totaled (one of the first production runs actually I believe), they are very nice pieces.

flattusmaximus78

iTrader: (1)

How would gears not make a difference? You start at a higher rpm when the car downshifts.

redbird555

iTrader: (14)

No...... That's the whole point of a stall. A stall converter will "slip" itself and the engine into the high rpm range to deliver more power. The shift extension when it does shift is also determined by the stall. Gears in an auto will only change the shift points around, stalls get rid of dead spots.

Therefore the only difference gears will make is making it drive nice with the converter, its been proven countless times gears make little to no difference on stalled autos.

Nick.H

Holy **** this is one of the funniest threads in a while

Sticks n Stones

agreed completely. My 3.70 gears almost seemed to slow me down from my stock 3.46 gears. actually hurt me from a roll, too.

Mavn

iTrader: (3)

I don't have a big enough stall to make the gears irrelevant... Of I had a 4k stall I wouldn't do them. But my small stall needs them.'

marc97taws6

iTrader: (6)

So sheltered.
Love that movie.
Did you give her the screaming pirate?

Gt4urass

Is that anything like the screaming seagull? Where you dip your dick in the sand before you start banging her???

assasinator

my feelings are crushed by another," can nevah lose" boss losing. started in the wrong rpm, shifted in the wrong rpm, shifted slow, wasnt at full throttle.


good kill OP. bet it was fun.

BrntWS6

iTrader: (7)

pics of said ****

marc97taws6

iTrader: (6)

X2

RJDio

SPANK! love it

BODUKE

Good Kill!

Mavn

iTrader: (3)

Thanks people. I also took down an intake/xpipe/exhaust/dyno tuned 2014 5.0!

big hammer

all bolt on 5.0s trap 128 mph! good job!

autogeek23

iTrader: (13)

Silly 5.bros. nice kill

Marcus S

Great race! Posted on the blog here.

I actually like the Boss 302 in general, but he got walked. Nice kill 100%.