cliffdiver86

As the title says, i ran my buddies 357ci H/C/I fox body stang against my 98 Z28 and there's a little clip at the end you guys will enjoy!


https://www.youtube.com/watch?v=-gpo...ature=youtu.be

CyberGrey Z28

iTrader: (4)

Cool video. I like seeing those Fox's still running

2003Cobro

What kinda power do both cars make? how is the fox heavier than the fbody?

cliffdiver86

Thanks guys. The fox was never dyno'd but it ran a best of 11.94 @ 115mph at Lebanon valley, the camaro ran a best of 12.1 @ 111mph with the old junk 4l60/converter. Since then i put a built TH-400 and a yank converter in it which made the car noticeably faster.

As far as the weight the fox has a 6 point steel cage, full interior, anti roll bar set up etc etc. The camaro is basically stripped-no ac, abs, radio/speakers, sound deadening, strut bars, wipers, wiper reservoir, back seats, etc etc

90notch5.0

Good race figured the fox would pull ya your Z runs hard

HioSSilver

iTrader: (8)

Good runs! I would say you and the fox are probably similar in weight. Those cars are pretty light. Looks like you guys would be a dead heat w/o the passenger. But the furd needed more cubes to do that

98MysticGreen

Hey cliff do you know what cam you have in you're car and specs on it ? I 2 drive a 98 and intend on doing a cam just not sure what i want to go with since 98's are ****

cliffdiver86

I wish we got one more run in with even number of passengers but **** happens haha, i replied to your pm 98MysticGreen

08nastygt

What intake, heads and cam does the fox have?

big hammer

lol oh dear....

Gt4urass

Great vid man. Y'all looked like a decent run for one another. Good runs.

cliffdiver86

Honestly i thought i was going to get spanked by the fox, but the camaro surprised me. As for the specific heads cam intake im not sure. I not its a pretty decent size nitrous cam, aluminum heads, and a maybe a high rpm intake?

dirkdiggler350

Im in the area if you guys ever wanna have some more friendly competition. Its funny to i raced a fox the other day who has a 357 with very similar mods and a big shot on it, not the car in the video but im sure you guys prob know the kid to.

TTVRacing

Start spraying the freaking car already man!

Btw.. the fox has a comp cams solid roller .608/.614 242/248 110 lsa cam. ported vic junior, worked holley 750, and the heads are hogged out performer rpms..

Unfortunately with the added 250lb's from the cage/spool/anti roll/standalone/rear end bracing.. the car is probably only a low 12 car now on motor..

However.. that car was always a nitrous motor.. 12's to 9's in 1 shot

*NSFW Language*

TTVRacing

That's Mike's car.. its a tamer version of the blue car.. box stock heads, non ported intake, hydraulic roller cam.. I'll tell ya what though.. for a 12.60@105mph car... it runs 10.50@125-126 consistently on the shot and it isn't setup for nitrous.. the car just plain works as well.

Where's those vids man!

dirkdiggler350

Yup that was him, neither of us had a camera at the time but on motor it was a dead even race since that race tho i put a good tire on the car i was spinning pretty bad. I figured you guys knew each other lol

MACHXLR8

In the vid, he gave the weight of the cars..
Camaro was 3150lbs. Fox was 33XX

snake95

More cubes and losing is GM's motto, bro. You can't just give it away

Heater

I had a 357 in my last Fox Body. Hard running motors, had all the local LS guys respect.

HioSSilver

iTrader: (8)

I bettin those are guesstimate.
It was a w for the Camaro with less cubes. Not to mention the tow home.