Just ran a red T/A and an SRT4
#121
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by BigBronco
but i enjoy manual labor, because people like you and me have the size and strength to handle those jobs with ease!
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
#122
TECH Senior Member
iTrader: (2)
Join Date: Sep 2003
Location: Houston
Posts: 10,591
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hahaha, yea man i just turned 19 on July 2...
but i am so dirt poor, my paychecks go pretty much back into the car... i do not have any money like what Alex has....
dont worry though, cant say i am uber immature or anything
but man i still need to line hone, hone the cylinders .030 out, and deck a few thousandths off the block before i can do anything... i will get pics of the forged JE flat tops pistons (can you say nitrous
) and the Eagle crank and what not that i am puttting in the motor soon
but i am so dirt poor, my paychecks go pretty much back into the car... i do not have any money like what Alex has....
dont worry though, cant say i am uber immature or anything
but man i still need to line hone, hone the cylinders .030 out, and deck a few thousandths off the block before i can do anything... i will get pics of the forged JE flat tops pistons (can you say nitrous
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
#123
TECH Senior Member
iTrader: (2)
Join Date: Sep 2003
Location: Houston
Posts: 10,591
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by mmyfault
you say something like this @ srtforums, instant 20 page thread ![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
reminds me of a forum called www.offtopic.com
#124
!LS1 11 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by BigBronco
nope, i am off today, but i am going to mow some more lawns, make about 80 bucks in two hours ![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
Yesterday i learned how to design a cam, and degree one in, and find out all of the specs of the cam, while in a mock up motor....
i am in the process of making a cam for my 347![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
Yesterday i learned how to design a cam, and degree one in, and find out all of the specs of the cam, while in a mock up motor....
i am in the process of making a cam for my 347
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![The Patriot !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_patriot.gif)
#125
TECH Senior Member
iTrader: (2)
Join Date: Sep 2003
Location: Houston
Posts: 10,591
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i will let you guys know how it turns out... the cam is going to be a solid hydraulic,
.6XX lift on both sides 23X's duration on intake and exhaust.
i might have the cam advanced a little bit with the Intake Centerline right at 112 and the exhaust center line at 115 or 116, not sure yet... so i will have a near 114 Lobe seperation angle...
still not sure, i am going to have Erik, at the shop help me... but the cam should be big and make some good power!
.6XX lift on both sides 23X's duration on intake and exhaust.
i might have the cam advanced a little bit with the Intake Centerline right at 112 and the exhaust center line at 115 or 116, not sure yet... so i will have a near 114 Lobe seperation angle...
still not sure, i am going to have Erik, at the shop help me... but the cam should be big and make some good power!
#126
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by BigBronco
i will let you guys know how it turns out... the cam is going to be a solid hydraulic,
.6XX lift on both sides 23X's duration on intake and exhaust.
i might have the cam advanced a little bit with the Intake Centerline right at 112 and the exhaust center line at 115 or 116, not sure yet... so i will have a near 114 Lobe seperation angle...
still not sure, i am going to have Erik, at the shop help me... but the cam should be big and make some good power!
.6XX lift on both sides 23X's duration on intake and exhaust.
i might have the cam advanced a little bit with the Intake Centerline right at 112 and the exhaust center line at 115 or 116, not sure yet... so i will have a near 114 Lobe seperation angle...
still not sure, i am going to have Erik, at the shop help me... but the cam should be big and make some good power!
#127
TECH Senior Member
iTrader: (2)
Join Date: Sep 2003
Location: Houston
Posts: 10,591
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by mmyfault
myfault just heard: "blah blah blah blah blah, cam blah blah blah, ear lobe blah blah erik"
what you meant to say all you "saw and comprehended"
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#128
!LS1 11 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
347.....
Hmm. Titty used to have that.
Remember his sig... One more cube than you and some gas to make me laugh... or something like that.
Sounds swweeet.
The cam should rock. 114? Make it lope man! 110!
Hmm. Titty used to have that.
Remember his sig... One more cube than you and some gas to make me laugh... or something like that.
Sounds swweeet.
The cam should rock. 114? Make it lope man! 110!
#129
TECH Senior Member
iTrader: (2)
Join Date: Sep 2003
Location: Houston
Posts: 10,591
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i believe it was " a few more cubes then stock and some gas to trap at 13X!!"
very classy of chris to show himself and his car off like that!!
i have a pic of him in his car! look
![](https://pic15.picturetrail.com/VOL565/2334977/4588479/60102421.jpg)
![](https://pic15.picturetrail.com/VOL565/2334977/4588479/60102411.jpg)
![](https://pic15.picturetrail.com/VOL565/2334977/4588479/60102398.jpg)
btw: his car so ******* owned, then he sold it
very classy of chris to show himself and his car off like that!!
i have a pic of him in his car! look
![](https://pic15.picturetrail.com/VOL565/2334977/4588479/60102421.jpg)
![](https://pic15.picturetrail.com/VOL565/2334977/4588479/60102411.jpg)
![](https://pic15.picturetrail.com/VOL565/2334977/4588479/60102398.jpg)
btw: his car so ******* owned, then he sold it
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
#132
TECH Enthusiast
Join Date: Jan 2004
Location: Cincinnati, OH
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by SouthFL.02.SS
That's one sweet ride.
I had a 5.0 '93 Notch.
I had a 5.0 '93 Notch.