If you're that same kid in a video of your SS vs a pullied cobra... you shift like you're 80 years old and you BARELY beat the cobra! I would be worried if I was you.

 

Red'
Man, what rpm do you hit 22PSI at?! What size pulley are you running?

 

If I could put a 3 foot "rollseyes" in here that jumped out of the screen and shook people, I would.

 

Ya 564 at the wheels it an 80% power transfer form flywheel to the wheels and i try and scan in my dynos and post them its about 705hp at my flywheel this summer i want to stroke and bore another ls1 block i have to a 427cid. Ya i know its another rx ls1 thing but he's talkin and i dont know alot bout rotors so but thanks for ur help

 

No problem man. So when do you hit 22PSI on that monster? Must be a handful!

 

22psi from a p1? WTF??????

 

Shhhhh

 

Na all the cobras ive raced ive beaten them pretty badly i got lots of vids so if ne body knows how to post vids let me know

i hit 22 at 4700 and my pully is a 4 inch oh **** my bad my charger isnt a ps1c thats what i had it a ds1c make sence know?

 

Oh yes, it makes plenty of sense.

 

look heres exactly what i got a lunati 408 stroker kit (full floating), with 11:1 compression ls2 heads port matched and polished, ls6 intake, 90mm throutle body, lunati cam with .526'' lift, slp long tube headers, strait to gmmg chambered exhaust,

 

I don't think any of this makes sense. You have a 700hp Camaro and forget what supercharger you have and have to ask how you will do against a mildly modded Turbo II RX7? And let me get this straight as well, you don't want a car that probably has 200whp to get bragging rights if he beats your 700 horsepower car? If his RX7 beats your "700hp" Camaro then I would venture to say he deserves bragging rights. Do you honestly think his car has anywhere near the hp it would take to beat you? If so he would not be bragging about beating low 13 second cars and would be bragging about beating R1's and airplanes. And how does he beat 4 SS's and yet no Z28's? Either you are making all of this up or you just bought your car pre-modded and have no idea what it is capable of.

 

You are almost as bad as that guy in the vid with the "Mustang GTR".

You dont have a 408. You dont have a D1SC or P1SC. You dont have a race lined up against a RX7 with standalone and upgraded turbo. You dont run 22PSI. You dont make 564 at the wheels. You dont have an LS1 most likely. Possibly not even a car.

If you had just read my posts carefully you would know that nobody beleives you. As it is, you did not pick up on that, and so I thank you for the entertainment you've unwittingly provided on behalf of all who read this. Have a nice evening.

 

22 lbs. huh? And its a stroker motor? Did Vin Diesel hook that **** up for ya? He must get that extra boost from the NOS, the two big bottles. But only 564 hp. Damn, he ripped you off dude. I made that in my D15 Civic with only 46 lbs. of boost from my T-98. Vin is the ****.

 

I just looked up that procharger, and some dude was making like 700 whp and run 9's on like 9 lbs. of boost.

 

ok you got me

 

Were you racing Paul Walker's Skyline when you went 170?

Taken from one of this 17 year old's posts:
"I've done 170 in my friends firehawk i got the video so if ne one know how to post vids let me know and i will. it actually felt stable in light at all i even switch to a right lane so i wouldnt hit a car up ahead.

Hey does ne body know it a T/A has better airodinamic than an SS i want to see how fast i can push my ss before i start to fly"

You got mad driving skills yo! And you just got your license!

 

Ok well there is no way your pushing 22 psi with a ps1c, not possible, Maybe if it were a YSI trim or an F1 blower you might see that much boost, but def not on a stroked 408? Also as someone else already said your only seeing 500+ rwhp with 22psi? Also your running 22 psi on a engine with 11:1 compression? Yea ok well I have a stroked 8000000 cubic inch engine running twin turbonators at 700 psi and i make 2rwhp...honestly man no reason to lie, your not impressing anyone.

 

**** ya bro ive also race formula one

 

Your an idiot. Take that **** to the civic boards. People here actually have mods like that, and know your full of ****. No one builds a 408 stroker with 11:1 compression for a blower. Your not running 22psi with a P1, D1, F1, or anything like that with a 4" pulley at 4700rpm. How much psi do you run when you rev that motor out to 7k rpm? 35psi? At least make it believable.

 

Yeah me too.