rice downing muscle?
#43
Originally Posted by silverbandit0996
well sorry for wasting everyones time with this thread but we raced and 1) it was ugly even from a 40 kick and even worse from a dig. 2) he really did spin till 4th tho, and is car is light as a mo fo 3) i think around 1300. but i think he got the 4) power he said and the traction he said but he did not wax like he said.
1) No it wasn't. Unless of course this again was a dream.
2) No he didn't. Again, dreaming.
3) Kilograms?
4) Seriously. Weakest B.S. story ever. Ok, maybe not ever. But bad.
#44
Originally Posted by silverbandit0996
yea the dig i pulled about 3-4 busses and shut down. the roll i kept pulling like to 135 and shut down by then he was a good 4-5 cars back.
#45
A 220 whp car that is gutted and less than 2200 lbs. is not going to lose to a maybe 300 whp 3600 lb. car. I don't care whether it was a Honda or a Geo. Especially by 12+ cars from a dig. a 220 whp Honda like that should be in the 12's pretty easily.
#46
Thread Starter
TECH Enthusiast
iTrader: (2)
Joined: May 2006
Posts: 564
Likes: 0
From: IN A VAN, DOWN BY THE RIVER!
why does everyone think its b.s? i didn't say i weighed the car all i know is what he told me. its not like i could pick it up and say oh yea its 1323 lbs. and his dry rotted tires did spin like a bitch and thats probably the reason i pulled like i did. but if he was to have better tires he could probably beat me or at least stick at my door. and i just guessed at his horsepower because thats what he said and he may not be right but he knows a hell of alot more about his car than i do.
#47
Originally Posted by silverbandit0996
why does everyone think its b.s? i didn't say i weighed the car all i know is what he told me. its not like i could pick it up and say oh yea its 1323 lbs. and his dry rotted tires did spin like a bitch and thats probably the reason i pulled like i did. but if he was to have better tires he could probably beat me or at least stick at my door. and i just guessed at his horsepower because thats what he said and he may not be right but he knows a hell of alot more about his car than i do.
Nevermind. I see it was a N/A LS motor. He MIGHT make 160 whp. Spinning to 4th? I don't care if he was on ice, I don't see that.
Nice kill.
#48
Maybe he makes "200hp" at the crank? LOL Good kills...Ive never really worried too much about the little cars here in town. A lot of talk and i think 1 or 2 cars have ever ran in the 13s after months and months of talking trash. Of course if you were in a big city (chicago for example) then I might worry.
#49
I think if you really stripped one of those old Honda's it would be ridicuoulsy lite. I know a shop in town has a little hatch completely gutted, i mean everything you can think of is gone except the drivetrain. you can pick the back end off the ground! This one has a motor swap and some big *** turbo on it.
I raced a 90-91 hatch with a turbo and fmic in my lt4 ta, i pulled him on a roll pretty nice, but he jumped me from a dig and i had to pass him at about 60mph. So you DO need to watch some of those little "ricers'
I raced a 90-91 hatch with a turbo and fmic in my lt4 ta, i pulled him on a roll pretty nice, but he jumped me from a dig and i had to pass him at about 60mph. So you DO need to watch some of those little "ricers'
#51
wow i was reading this tread and it reminded me of something that happened to me. i had this guy at work with a friend in CRX with only header, intake and he said he would beat me, at first i wasnt going to race him but he got on my nerves so i agreed to run him. so i get there im on street tires and i notice he has slicks in the back and said he is running on them so i tell him that was fine, anyway the interior was stripped out and stuff, it took 2 little guys to lift the car to change the tires. so it wasnt very heavy. any way since he was on slicks he got out ahead of me but i ran him down and beat him by 1 car leangth in the first race ( i got a bad launch) and by 2 cars in the second. first race was right at a 1/4 mi and the second was inbetween 1/8 and 1/4. the funny thing is all they did at the end was accuse me of spaying. i hate it when people make excuses.
- Josh
- Josh
#52
Originally Posted by dailydriver
So what do all of those gutted 10 sec. or better all motor Civics weigh??
#54
Originally Posted by RED04Z06
An LSD on street tires in a FWD is useless. Just make sure he aint bringing out no slicks or anything. But a properly built LS/VTEC can make 210whp easily. Also if this hatch is fully gutted and weighs around 1800-1900 lbs, and is on slicks, you might be in trouble.
??? It seemed very usefull in my 2000 Integra Type R on street tires.
#55
Originally Posted by LSINA7
We had a gutted, and I mean gutted 92-95 Turbo B18b Civic hatch at my friends shop one day. He had it weighed and said with 1/4 tank and him not in it it weighed 1987lbs... Its a all out drag car.
1300 pounds...do people actually believe this when they type it them selves???
LS, I agree, we ran a gutted (big time) JDM RHD Civic Type R at Laguna Seca two years ago, it tipped the scalles at 1895 with no gas and no driver.
Metal is heavy people, this aint balsa wood!
#57
Originally Posted by CTSVSL65AMG
1300 pounds...do people actually believe this when they type it them selves???
LS, I agree, we ran a gutted (big time) JDM RHD Civic Type R at Laguna Seca two years ago, it tipped the scalles at 1895 with no gas and no driver.
Metal is heavy people, this aint balsa wood!
LS, I agree, we ran a gutted (big time) JDM RHD Civic Type R at Laguna Seca two years ago, it tipped the scalles at 1895 with no gas and no driver.
Metal is heavy people, this aint balsa wood!
#60
hahahah i wanna see a stripped civic with a bolt on h/c LS1 squished in it. Put it in the conversion section. I don't care if you have to sawz all the front of it to just get the manifold in. it can be done! i wanna see 450 horses in a 2300 pound car. better cut the fenders and put some giant *** slicks in too while you got the sawz all out.
Quote from someone or another that i saw on here
~Don't mention LS1tech-for the craziest ideas come from there.~
Quote from someone or another that i saw on here
~Don't mention LS1tech-for the craziest ideas come from there.~