GEN 1 Viper all that quick?
#41
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Jul 2005
Location: Crestview, FL
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
HAHA! Yeah, the 'ol man needs to get that car out of the damn garage and run me for sure! If it does happen, don't worry my LS1 brethren! I will get it on video! He daily drives a c6 corvette, so he does have some sophistication!
#42
I drove a 95 viper to 8.14 in 1/8. a 2001 viper at 7.98 in 1/8 and a 2001 z06 dynoed stock at 364rwhp and 365ftlbs with drs at 7.81 in 1/8. I think if u can drive you have him hands down, just shut it down at the 1/4. hell pass you at the top
#43
Well I just bought a red 99 rt10 with 450 hp and 490 rwt at the crank about 2 hours ago...I cant vouch for the gen 1 vipers but i can guarantee you that my 378 rwhp and 370 rwt 2004 auto C5 would have gotten smoked by the 99 Viper I have sitting in my garage right now...
I think my C5 would have needed 400 rwhp to even be close to this car....
Whats even trippier is that the registration for my auto C5 said it weighed 3310 pounds..The registration for my new 99 rt10 says it weighs 3390 pounds...Not as much as a differance as I thought there was gonna be weight wise.
But yea the vipers are pretty sick....Honestly since the Fbodys are around 200 pounds heavier than my C5 i think a Fbody needs around 410 rwhp to be even with a gen 2 viper...But this guys 400 rwhp should be more than enough for the gen 1...
Go get him and post up already!!!!!!!!!
I think my C5 would have needed 400 rwhp to even be close to this car....
Whats even trippier is that the registration for my auto C5 said it weighed 3310 pounds..The registration for my new 99 rt10 says it weighs 3390 pounds...Not as much as a differance as I thought there was gonna be weight wise.
But yea the vipers are pretty sick....Honestly since the Fbodys are around 200 pounds heavier than my C5 i think a Fbody needs around 410 rwhp to be even with a gen 2 viper...But this guys 400 rwhp should be more than enough for the gen 1...
Go get him and post up already!!!!!!!!!
#44
Originally Posted by preppy
I drove a 95 viper to 8.14 in 1/8. a 2001 viper at 7.98 in 1/8 and a 2001 z06 dynoed stock at 364rwhp and 365ftlbs with drs at 7.81 in 1/8. I think if u can drive you have him hands down, just shut it down at the 1/4. hell pass you at the top
#45
TECH Senior Member
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,355
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by 2.73 Vette
Well I just bought a red 99 rt10 with 450 hp and 490 rwt at the crank about 2 hours ago...I cant vouch for the gen 1 vipers but i can guarantee you that my 378 rwhp and 370 rwt 2004 auto C5 would have gotten smoked by the 99 Viper I have sitting in my garage right now...
I think my C5 would have needed 400 rwhp to even be close to this car....
Whats even trippier is that the registration for my auto C5 said it weighed 3310 pounds..The registration for my new 99 rt10 says it weighs 3390 pounds...Not as much as a differance as I thought there was gonna be weight wise.
But yea the vipers are pretty sick....Honestly since the Fbodys are around 200 pounds heavier than my C5 i think a Fbody needs around 410 rwhp to be even with a gen 2 viper...But this guys 400 rwhp should be more than enough for the gen 1...
Go get him and post up already!!!!!!!!!
I think my C5 would have needed 400 rwhp to even be close to this car....
Whats even trippier is that the registration for my auto C5 said it weighed 3310 pounds..The registration for my new 99 rt10 says it weighs 3390 pounds...Not as much as a differance as I thought there was gonna be weight wise.
But yea the vipers are pretty sick....Honestly since the Fbodys are around 200 pounds heavier than my C5 i think a Fbody needs around 410 rwhp to be even with a gen 2 viper...But this guys 400 rwhp should be more than enough for the gen 1...
Go get him and post up already!!!!!!!!!
You also got to remember you vette had a cam with no stall and 2.73 gears!
Just to give you and idea you c5 ran
You60ft x,xxx 1/8 8.399 mph 89.28 1/4 12.80x mph 110.764 H/C 224/224, A4-2.73, '03 C5
Me my 99 z28 my with pacesetter lt headers/catback/lid/stock tune
[/COLOR=Red] 60ft x.xxx 1/8 8.4 mph 87.54 1/4 12.926 mph 110.65 M6-3.42, '99 Z-28 full weight 3/4 tank of gas 255lbs driver
Last edited by SIC LSX; 08-28-2006 at 08:15 PM.
#47
Originally Posted by CTSVSL65AMG
Typical Viper Drivers can't drive....hmm
#48
My C5 ran a 12.8 at a track were the fastest bone stock 02 Z06's run 13.0 and the fastest bone stock gen 2 vipers run 12.6..
The air is just like florida and the track went up hill....So everyone was about a half second slower than what they would run at a track in the main land...
So my 12.8 at 111 mph is actually pretty fast by my tracks standards...especially when the stock gen 2 Vipers are trapping 113 mph here..
I think my Viper MIGHT have ran a 12.6 at 113 on a perfect pass at this track.
The air is just like florida and the track went up hill....So everyone was about a half second slower than what they would run at a track in the main land...
So my 12.8 at 111 mph is actually pretty fast by my tracks standards...especially when the stock gen 2 Vipers are trapping 113 mph here..
I think my Viper MIGHT have ran a 12.6 at 113 on a perfect pass at this track.
#49
Originally Posted by wvutransam
I don't know about typical Viper drivers bc I've only seen 1 in action. He ran a 13.56............................................. ..In an 06' SRT10
Thats horrible.
He couldnt drive. But you could start in second and run that in an SRT10.
#50
TECH Enthusiast
Join Date: Jan 2003
Location: Fairfax VA
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
FOR ALL THE SPECULATORS
To settle at least one debate......if anyone in the DC/Metro area owns a stock Gen 1 Viper and would like to see how it compares to a STOCK Z06, I cordially invite you to come out for a little friendly race, and we'll "GIT-R-DONE"
is this a call-out??? YES
To settle at least one debate......if anyone in the DC/Metro area owns a stock Gen 1 Viper and would like to see how it compares to a STOCK Z06, I cordially invite you to come out for a little friendly race, and we'll "GIT-R-DONE"
is this a call-out??? YES
#52
TECH Senior Member
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,355
Likes: 0
Received 2 Likes
on
2 Posts
mikey that sold gus his red viper has a stock viper and he ran 12.2 on street tires at hawaii racway park but he has hundreds of passes with vipers I should be around 11.7-11.9 or so ps i have beat a A4 car that runs 11.3's but thats on the street to different worlds at the track he gets like 1.5 60fts!!!
#53
TECH Senior Member
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,355
Likes: 0
Received 2 Likes
on
2 Posts
oh i gave also seen a silver Z06 running 12.5 on street tires all night long! And that was at hawaii raceway parks crapy track! He was slipping the clutch a lot to get traction!!v So 12.2's very possable with a good track!
hell my M6 99 z28 with ls6 intake, pacesetter headers, ory, catback stock tune Ran 12.9@ 110mph with full weight and a 255lbs driver and 3/4 tank of gas too! I dynoed 340/350 with that setup the tune was $hitty too!
So most Z06 dyno around 360whp 3,100lbs low 12's easy hell you could see some 11's with tires and a good driver!!
hell my M6 99 z28 with ls6 intake, pacesetter headers, ory, catback stock tune Ran 12.9@ 110mph with full weight and a 255lbs driver and 3/4 tank of gas too! I dynoed 340/350 with that setup the tune was $hitty too!
So most Z06 dyno around 360whp 3,100lbs low 12's easy hell you could see some 11's with tires and a good driver!!
#55
TECH Senior Member
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,355
Likes: 0
Received 2 Likes
on
2 Posts
I want to play!! I have a nice wet kit that if i loose i will put it on and i wont loose again fun fun fun
Me and 273 Vette live and some town and know each other! He's a nice guy! He has a nice viper too
Me and 273 Vette live and some town and know each other! He's a nice guy! He has a nice viper too
#58
Originally Posted by DansRedz28
So most Z06 dyno around 360whp 3,100lbs low 12's easy hell you could see some 11's with tires and a good driver!!
#59
Yea I made Mikey a offer on that red GTS Viper before Gus got it..
But you are somewhat mistaken..Mike ran the 12.2 with his only mods being DR's..100% bone stock he ran a 12.6....
So DansRedZ28...PM me and we'll set a race up between your modded camaro and my stock Viper....
Well go a few times with you NA....And then a few times with you on the juice. Should be fun.
then well post up that night.
But you are somewhat mistaken..Mike ran the 12.2 with his only mods being DR's..100% bone stock he ran a 12.6....
So DansRedZ28...PM me and we'll set a race up between your modded camaro and my stock Viper....
Well go a few times with you NA....And then a few times with you on the juice. Should be fun.
then well post up that night.
#60
SWEET!!! Do it guys....post up the vids!!! This is good stuff, good healthy racing, no bullshit, no one getting a puffed up chest and talking ****. Have fun and post up.
Vipers represent!!!!
Vipers represent!!!!