Which ball joints to use?
#1
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Jan 2002
Location: Mobile, AL
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I am in need of new ball joints for the car. Does anyone make poly or poly graphite ball joints for our cars? The only poly that I found were from Moog but I didn't see them for my car. Anyone know a source?
#5
TECH Regular
iTrader: (3)
Join Date: Jan 2005
Location: Magnolia, Texas
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
They only offer the lowers for 4th Gen F-bods which is the most important at least. I don't know the part#, I bought them from a local circle track shop. But I first noticed them in a major mail order catalog's circle track section. Thier descriptions list the applications. The company is not a sponcer but you can find them if you look just a little.
Vernon
Vernon
#6
TECH Senior Member
iTrader: (35)
![Lightbulb](https://ls1tech.com/forums/images/icons/icon3.gif)
They only offer the lowers for 4th Gen F-bods which is the most important at least. I don't know the part#, I bought them from a local circle track shop. But I first noticed them in a major mail order catalog's circle track section. Thier descriptions list the applications. The company is not a sponcer but you can find them if you look just a little.
Vernon
Vernon
If your looking for exact factory replacement upper ball-joints:
Mcquay-Norris # FA2111
Here's where I recently got mine:
http://stores.ebay.com/thetireclub_B...QQftidZ2QQtZkm
#7
TECH Fanatic
iTrader: (1)
Join Date: Sep 2002
Location: Brisbane, QLD, AUS
Posts: 1,747
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Standard Moog part# K6145
AFCO/Afabcrop part #20039 (essentially rebranded version of above listed Moog)
AFCO/Afabcorp Low-Friction variant part# 20039LF
AFA the Low-friction variants, they're ones that I'd highly approve as well, however since they are designed with high-tolerances, it's advised to maintain proper lubrication as well as keeping the dust boots in good condition as well.
AFCO/Afabcrop part #20039 (essentially rebranded version of above listed Moog)
AFCO/Afabcorp Low-Friction variant part# 20039LF
AFA the Low-friction variants, they're ones that I'd highly approve as well, however since they are designed with high-tolerances, it's advised to maintain proper lubrication as well as keeping the dust boots in good condition as well.