Advice needed
01-13-2009, 05:28 PM
#1
Advice needed Im getting closer to installing a strano/koni setup real soon. I recently took my front shocks off my car. I took a look at my stock strut mounts and decided to get some new ones, the nut that holds the shock to the mount was unrecognizeable, so I didnt take my stock struts apart. I got my new mounts today, but is their anything else i need to get my new struts connected to my new mounts? Do I need any of the stock parts on my stock struts?
01-13-2009, 05:31 PM
#2
Yes... you need to lower spring isolator (it sits on the spring perch, under the stock spring). And most new shock mounts don't come with the pie-piece shaped insert that goes on top. If yours did, great. If not you need to visit a dealer for those too.
__________________
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
[/IMG]
01-14-2009, 04:47 PM
#5
You're good to go!!!!
__________________
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!