torque arm
torque arm if i am runing intrax 2 inch lowering springs , bmr lower control arms , bmr lca relocation brackets , and a spoon adjustable pan head bar can i still run the stock torque arm till i get money to get one and what would the best be to get with my set up
Torque arm question! Hello,
Yes its fine now too run a stock torque arm! But what I would recommend is when you get a aftermarket get a adjustable...To be able to get the most out of your ride!
If you have any other questions feel free to ask!
Thanks Again,
Brad
Yes its fine now too run a stock torque arm! But what I would recommend is when you get a aftermarket get a adjustable...To be able to get the most out of your ride!
If you have any other questions feel free to ask!
Thanks Again,
Brad
Hello, thank you for being a BMR customer. you are going to need an adjustable arm to be able to set your pinion angle. Another thing to consider is a torque arm relocation crossmember. It relocates the torque arm off of your transmission and prevents the tailshaft from getting broken. It is not mandatory that you have it but it will keep the transmission in one piece. It also allows you to be able to adjust the front of your torque arm up or down which helps with your cars weight transfer. Give me a call or pm me if you have any questions.
