Which torque arm relocation crossmember
#1
Which torque arm relocation crossmember
So im looking to relocate my factory torque arm mount from the trans to the crossmember. I am going to be reusing my factory torque arm for the time being. I would prefer this new crossmember give me a little more clearance for my Ypipe and not kill my ground clearance. Im stuck between the two manufacturers below. Thanks for the help.
Im currently stuck between the UMI
http://texas-speed.com/shop/item.asp...d=746&catid=79
or the BMR
http://kentucky-speed.com/product_in...roducts_id=339
Im currently stuck between the UMI
http://texas-speed.com/shop/item.asp...d=746&catid=79
or the BMR
http://kentucky-speed.com/product_in...roducts_id=339
Last edited by Justin93; 01-22-2009 at 01:03 PM.
#2
Relocation Kit
Hello,
Thank you again for considering UMI Performance. You should not have any clearance issues with our relocation kit. If you have any questions or problems feel free to ask or call!
Thanks Again
Brad
Thank you again for considering UMI Performance. You should not have any clearance issues with our relocation kit. If you have any questions or problems feel free to ask or call!
Thanks Again
Brad
#3
LS1Tech Premium Sponsor
iTrader: (5)
So im looking to relocate my factory torque arm mount from the trans to the crossmember. I am going to be reusing my factory torque arm for the time being. I would prefer this new crossmember give me a little more clearance for my Ypipe and not kill my ground clearance. Im stuck between the two manufacturers below. Thanks for the help.
Im currently stuck between the UMI
http://texas-speed.com/shop/item.asp...d=746&catid=79
or the BMR
http://kentucky-speed.com/product_in...roducts_id=339
Im currently stuck between the UMI
http://texas-speed.com/shop/item.asp...d=746&catid=79
or the BMR
http://kentucky-speed.com/product_in...roducts_id=339