Post install questions
07-19-2009, 01:21 PM
#1
12 Second Club
Thread Starter
Join Date: Jul 2004
Location: Mpls, Minnesota
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Post install questions So I installed my UMI non-adjustable torque arm, as well as my BMR LCA's(greased n' all), now after driving the first time, it seems I'm getting vibration in my clutch pedal that I wasn't previously. Could this be due to the new torque arm/bushing being firmer etc..? Other ideas?
07-24-2009, 07:07 AM
#3
UMI Performance! Hello
Yes! Going with a poly bushing on the torque arm will be more solid compared to the factory rubber. If you have any other questions feel free to ask and I will be more than glad to help! And thanks again for choosing UMI Performance!
Thanks
Brad
Yes! Going with a poly bushing on the torque arm will be more solid compared to the factory rubber. If you have any other questions feel free to ask and I will be more than glad to help! And thanks again for choosing UMI Performance!
Thanks
Brad
07-24-2009, 07:42 AM
#4
TECH Resident
Join Date: Feb 2003
Location: Dallas, TX
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
I think you have other issues. I installed the UMI Torque Arm and while things do feel more solid I sure as hell don't have any vibration in my clutch pedal. What kind of LCAs did you go with? Have any rod ends?