Need Help with Caster Bolt!!!
Thread Starter
TECH Fanatic
iTrader: (23)
Joined: Jul 2006
Posts: 1,411
Likes: 0
From: Baltimore, MD
Need Help with Caster Bolt!!! I cant seem to get that damn caster bolt back in to reinstall the front lower lca. any advice that could help me would be very much appreciated.
Thread Starter
TECH Fanatic
iTrader: (23)
Joined: Jul 2006
Posts: 1,411
Likes: 0
From: Baltimore, MD
i got the bolt all the way thru but its hittin the metal bracket and no matter what i do i cant get it to go thru. i have even tried raising and lowering the damn control arm. this **** is so frustrating.
Thread Starter
TECH Fanatic
iTrader: (23)
Joined: Jul 2006
Posts: 1,411
Likes: 0
From: Baltimore, MD
yea i have tried pushing it in and out, but nothing is working. im afraid i might have done something wrong, i installed new bushings. if nothing works, im just gonna get a dremel and cut that tiny piece out.
Thread Starter
TECH Fanatic
iTrader: (23)
Joined: Jul 2006
Posts: 1,411
Likes: 0
From: Baltimore, MD
You might regret using a dremel... Take it (the LCA) back out and get the rear one in first like #5 said above. I had to use both a socket/drive and a breaker bar to help (nudge) it in before doing the front bushing (popping) it back in. The rest is simple after that.
Good luck!
Good luck!
