will8908

iTrader: (2)

I'm installing my strano springs and koni 4/4s today and I can't get sam strano on the phone.... anyone who has this setup and can tell me sam's instructions for adjusting the shocks please chime in!! Much appreciated.

99Bluz28

iTrader: (35)

Here's a good starting point if your on stock springs:

3 sweeps from full soft up front, and full soft in the rear.

will8908

iTrader: (2)

Im not on stock springs. As I said Im also installing the Strano Lowering Springs. I went ahead and went with 4 sweeps from full firm on front, and 1/2 sweep from full soft on rear.. that's what I read other's had done on here, and no one has replied to my question.

The Alchemist

iTrader: (19)

Set the rear to full soft. Take it from my experience, I had them set firmer and the rear was jittery. It wanted to step out constantly when under power and in a turn and I hit any kind of bump in the road. Since going to full soft, I get a better weight transfer as well and subsequently, better traction.