Moser 12 bolt in LT1, Part numbers please?
06-03-2010, 03:56 PM
#1
Moser 12 bolt in LT1, Part numbers please? All-
I bought a used Moser 12 bolt from Jason Short.
I have a 97 Z28 M6, 4 channel (ABS/TCS).
The rear end I bought is a 3 channel (just with ABS sensor in top of housing).
I bought the proper ABS rings from Moser to convert to a 4 channel, but I need the other parts now (correct backing plates, ABS sensors). I don't want to rip apart my existing 10 bolt, I'd rather get replacements.
From what I can gather, the GM part numbers are:
Shields - 12454976 and 12454977
Sensor - 10456264
Backing plate - 12454980 and 12454981
Can anyone confirm these? Does anyone know where I can get them (don't have to be new)? Is there an assembly I can just purchase, or do I need all parts separately? I'm having trouble finding any of these parts available from local dealerships and online. Thanks-
-Brett-
I bought a used Moser 12 bolt from Jason Short.
I have a 97 Z28 M6, 4 channel (ABS/TCS).
The rear end I bought is a 3 channel (just with ABS sensor in top of housing).
I bought the proper ABS rings from Moser to convert to a 4 channel, but I need the other parts now (correct backing plates, ABS sensors). I don't want to rip apart my existing 10 bolt, I'd rather get replacements.
From what I can gather, the GM part numbers are:
Shields - 12454976 and 12454977
Sensor - 10456264
Backing plate - 12454980 and 12454981
Can anyone confirm these? Does anyone know where I can get them (don't have to be new)? Is there an assembly I can just purchase, or do I need all parts separately? I'm having trouble finding any of these parts available from local dealerships and online. Thanks-
-Brett-
06-04-2010, 01:13 PM
#2
Cancel that. All I had to do was quit thinking about it so much. Checked out my car's rear, has no "shields" behind the rotors, and I had the right backing plates already (minus the holes needed for ABS sensors...but I'll take care of that.
Close thread.
Close thread.
