spring bumping on passenger side?
Thread Starter
Joined: Apr 2006
Posts: 549
Likes: 0
From: Little Rock Ar
spring bumping on passenger side? I have eibach prokit on my trans am with 18x10.5 c6 wheels in the rear with a 7/16 spacer . Sometimes when I hit a bump on the freeway the passenger sit wheel will hit. Never the driver side. not causing damage just trying to see how to stop it. I had to BFH mod the inside fender wheels to get these tires and rims to fit so I don't think I can take the spacer out. Do I need a new shock or has the spring gotten weak. I still have my stock springs I am thinking about putting back on the rear.
Last edited by 99Transamls1; Oct 12, 2010 at 08:33 AM.
Similar on my Eibach/Bilstien combo, but I was bottoming out. I did the heater hose in addition to the isolator and shaved the bump stops 1/2 inch. That stopped the klunking/bottoming out. But the Pro Kit springs are notorious for sagging.
