Drivers Side Panhard Relocation
Drivers Side Panhard Relocation Hey everyone. I was thinking about buying a panhard bar relocation kit (UMI) in order to gain exhaust pipe clearance. The problem that I have is the car is lowered and through my research on this site I have found various threads that outline problems regarding panhard angle after using the relocation kit as well as interference problems between the UMI brace and the actual panhard bar. To remedy this situation I was going to possibly use a bracket that Jegs sells that relocates the panhard rod on the DRIVERS side. This would essentially move the panhard bar so it would be parallel to the ground and eliminate the interference problem. If anybody has run this particular set up I would greatly appreciate any feedback you can give me.
The Jegs relocation bracket has a very vague description and I am unsure how exactly this bracket goes on. For example does it go inside the factory panhard bar bracket or on the outside? Thanks in advance everyone.
The Jegs relocation bracket has a very vague description and I am unsure how exactly this bracket goes on. For example does it go inside the factory panhard bar bracket or on the outside? Thanks in advance everyone.
