stuntinZ28

I have a 95 z28 lt1 found the pro kit but i am looking for more than 1.8 drop running c6 19x10 rear with 285/35/19 rear and 255/40/18 front any suggestions and pictures. thanks

BMR Sales2

iTrader: (40)

You could use our BMR 1.25" lowering springs and 1" drop a-arms in the front and use our BMR 1.25" lowering springs in the back along with the heater hose mod which will lower it an additional .75". Here is a pciture of GM High Tech's "STI Killer" which has that exact setup on the front and rear.

stuntinZ28

what is the heater hose mod...? and whats that set up run

cancam99ss

iTrader: (8)

link to those arms?

BMR Tech2

iTrader: (5)

AA020

BMR Tech2

iTrader: (5)

The heater hose mod is when you remove the rear spring isolator and replace it with a smaller diameter heater hose around the spring coils. This will drop the back of the car between .5-inches to .75 inches.

stuntinZ28

hmmmmm good idea lol hillbilly engineering sweet thanks