Burken01

iTrader: (88)

Just picked up some BMR LCA's used for a good price, only one problem they are missing these end pieces..



only 1 on each Lca is missing, so 2 total..

my question is, is it just to contain grease thats applied? Can any threaded piece be put in instead of the BMr pieces..

02TransAm/Batmobile

iTrader: (32)

Jus' go into your autoparts store and ask for "Zerk" fittings. Thread some on until you find the right size.

Burken01

iTrader: (88)

ok I'll check it out tommorow thanks. I have white lithium grease, is that any good? or should something stickier be used to lubricate

dr_whigham

iTrader: (49)

I thought they recommended marine grease for the poly ends... But Batmobile is right about the zerk fittings. Either an auto parts store or a hardware store (Lowes / Home Depot) where all the trays and bins are for nuts and bolts.

astro11271984

iTrader: (5)

I use mobil one synthetic

trans_am7935

iTrader: (15)

i use this as well, but BMR does recommend the sticky marine grease.

Burken01

iTrader: (88)

interesting, so anything that lubricates and won't let the poly wear out..