slp223

iTrader: (1)

My rear 21mm sway bar is hitting my ktre 12 bolt not that i added a TA cover any recomendations? thank you

dgmiller

iTrader: (1)

I have heard of this problem begore. Run a search. I'm sure there was a spacer available to go between the axle shaft and the swar bar brocket to allow the bar to clear the housing.

WILWAXU

iTrader: (6)

Go to Lowes or HD and pick up some flat bar stock and make spacers for the u bolt mounts. My car needed about 1/2" to clear, so I cut 4 pieces of 1/4" thick bar stock and drill it as a spacer.

angst911

my stock rear swaybar would slightly rub on the bottom lip of my ta cover on my strange 12 bolt when I first got it.... it quickly resolved the problem by filling the t/a cover at the point by itself (it just rubbed the raised lettering off)

2MCHPWR

iTrader: (10)

i use a BMR rear sway bar mounting kit and it seems to give me adequate space, although i use stock rear sway bar.