stock front springs?
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hey guys, getting ready to put my stock springs back on the car with Koni lower perch & heater hose mod in the rear....have the Strano springs right now and like them a lot, but i need to regain some ground clearance.
however, i have a slight problem: i have 2 sets of springs sitting in my closet, one from my old thunderbird that i just haven't gotten around to getting rid of yet, and the stock springs from my camaro....and i don't remember which ones are the camaro springs...it's been a few years since i swapped them out.
so here's a photo of the front springs side by side, and of both ends of each spring....which ones are the camaro ones?:
however, i have a slight problem: i have 2 sets of springs sitting in my closet, one from my old thunderbird that i just haven't gotten around to getting rid of yet, and the stock springs from my camaro....and i don't remember which ones are the camaro springs...it's been a few years since i swapped them out.
so here's a photo of the front springs side by side, and of both ends of each spring....which ones are the camaro ones?:
#6
LS1TECH Sponsor
iTrader: (41)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The ones on the left. Have no idea what the other ones are from.
__________________
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion