Lowering Springs for my 2000 Camaro SS
#1
Lowering Springs for my 2000 Camaro SS
Hi everyone,
I want to lower my 2000 camaro ss soon and was wondering what springs I should go with? I am leaning towards BMR or eibach springs. I still want the car to at least have a decent ride still. Which springs do you guys recommend? Post pics if you have some!
Thanks!
I want to lower my 2000 camaro ss soon and was wondering what springs I should go with? I am leaning towards BMR or eibach springs. I still want the car to at least have a decent ride still. Which springs do you guys recommend? Post pics if you have some!
Thanks!
#5
LS1Tech Premium Sponsor
iTrader: (40)
Hi everyone,
I want to lower my 2000 camaro ss soon and was wondering what springs I should go with? I am leaning towards BMR or eibach springs. I still want the car to at least have a decent ride still. Which springs do you guys recommend? Post pics if you have some!
Thanks!
I want to lower my 2000 camaro ss soon and was wondering what springs I should go with? I am leaning towards BMR or eibach springs. I still want the car to at least have a decent ride still. Which springs do you guys recommend? Post pics if you have some!
Thanks!
Also our BMR lowering springs have a lifetime warranty against spring sag so you are covered for the life of the springs.
If you decide you want to pick up a set of BMR lowering springs let me know.
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
#6
With our BMR lowering springs you can have that agressive lowered stance you are looking for without sacrificing too much ride quality or ground clearance. The Eibach springs have been known to sag over time and have a really bad ride quality so much so that many of our current BMR lowering spring customers were previously Eibach users.
Also our BMR lowering springs have a lifetime warranty against spring sag so you are covered for the life of the springs.
If you decide you want to pick up a set of BMR lowering springs let me know.
Also our BMR lowering springs have a lifetime warranty against spring sag so you are covered for the life of the springs.
If you decide you want to pick up a set of BMR lowering springs let me know.
Trending Topics
#8
i have BMR springs with Bilstein shocks, great package. the Stranos you really need to go with Koni's cause they will wear out the Bilsteins alot faster. not saying stranos are bad, they just require better shocks to get the full benifit of them. here is my lowerd T/A
uhhhh...no.
BMR's drop the front a hair further with the same 550# rate, and are stiffer in the rear. The differences are tiny, but if anything it's the exact opposite of what you said. The shorter distance that the shock has to do the work and the stiffer rate will require more shock. I think the main difference is Strano isn't going to tell you bilsteins are amazing for springs that stiff (I've tried bilsteins with similar springs, and after a few years they get tired), but it is a decent budget setup.
BMR or Strano with a bilstein is a fine budget setup, but Koni's are ideal for either setup.
#9
Straight from BMR's site
Front spring rates - 550 lbs/in linear
Rear spring rates - 160 lbs/in dual rate
Lowers vehicle 1.25"
Rear spring rates - 160 lbs/in dual rate
Lowers vehicle 1.25"
-Front spring rate: 550 lbs/in.
-Rear spring rate: 100 lbs/in. take up (non functional while driving), 150 lbs/in. working rate.
-Rear spring rate: 100 lbs/in. take up (non functional while driving), 150 lbs/in. working rate.
#13
Your t/a looks great lowered!! Are your BMR springs red? If so can you really notice that they are red when you're looking at the car in person? I am jw because I wanted to go with a black spring just so it isn't noticeable but seen that bmr springs only come in red now. Also, do you have any clearance issues with you long tube headers after you lowered your car?
#14
Straight from BMR's site
From Strano's site
So how is a shock on a nearly identical spring going to wear any differently? It's not. What BMR usually says is something along the lines of "We have tons of customers running that setup and they are extremely happy with it," which is true. Many people run it, it's a decent setup. What Sam says is that bilsteins are "workable" but not ideal, because that is also true, bilsteins will feel great at first but I tried some 500-600ish springs on them and after two years they started getting weak. Koni's are able to handle the rate better. I don't care who people give their business to, I just hope that they don't do it under the influence of blatant misinformation.
From Strano's site
So how is a shock on a nearly identical spring going to wear any differently? It's not. What BMR usually says is something along the lines of "We have tons of customers running that setup and they are extremely happy with it," which is true. Many people run it, it's a decent setup. What Sam says is that bilsteins are "workable" but not ideal, because that is also true, bilsteins will feel great at first but I tried some 500-600ish springs on them and after two years they started getting weak. Koni's are able to handle the rate better. I don't care who people give their business to, I just hope that they don't do it under the influence of blatant misinformation.
#15
BTW my stranos lowered the front 1.3 inches and the rear 1.4 inches. I have a system in the back so I have more weight. I currently have about 1,000 miles on the setup with the stock isolator in the rear and front konis on upper perch.
#16
LS1TECH Sponsor
iTrader: (41)
i have BMR springs with Bilstein shocks, great package. the Stranos you really need to go with Koni's cause they will wear out the Bilsteins alot faster. not saying stranos are bad, they just require better shocks to get the full benifit of them. here is my lowerd T/A
1. You cannot believe what you read on the internet.
2. I'm often an idiot for trying to pass along details to those not willing to understand it.
This is laughable, and sad, all at once. MY springs, are 550/150, BMR claims theirs are 550/160. That's about 7% stiffer in the rear, not softer. So how exactly are my springs going to wear shocks out faster that their's? And since theirs changed to be a lot more like mine, it's even more funny to me. Needless to say, this is NOT true.
Are Koni's the bigger, badder shock? Yes. Do I recommend them to anyone looking for the utmost control? Yes. But the Bilstein's can do a decent job, and I sell LOTS of kits with my springs and SLP Bilstein's.
__________________
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
#17
LS1TECH Sponsor
iTrader: (41)
I do recommend Koni because I believe they are the better damper. That's what I get for being straight up honest. I having to think I should just sell whatever parts folks want, and tell them what they want to hear. but it sure seems more and more folks only hear what they want to hear.
Man, is this frustrating.
__________________
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
#20
LS1Tech Premium Sponsor
iTrader: (40)
Keep an eye out for our announcement fo our Thanksgiving Day/Black Friday Sale!
We appreciate the good words!
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!