need brake adapter fitting M12 x 1.0 male to M10 x 1.0 female bubble flair
01-05-2013, 09:42 PM
#1
need brake adapter fitting M12 x 1.0 male to M10 x 1.0 female bubble flair does anyone know who and where i can get a brake adapter fitting from that is bubble flair both ends, the male end is M12x1.0 and the female end is M10x1.0.
I can tell you it is NOT dorman 788-522 nor AGS BLF-36C.
this is so i can replace the brake hard lines along the rear axle in a 2002 Camaro. ******* GM had used one side on the rear axle where the hard line has an M12 male fitting in the center that connects to the flex hose. I can't buy a hard line with an M12 on one end and an M10 on the other, or tell me where i can. I have a replacement line already formed on the axle which has M10x1.0 on each end, so i just need this stupid f'n adapter to move forward. I also don't feel like bubble flaring hard line, i don't have a tool to do it and if i were i don't want to spend more than $10 on it.
I can tell you it is NOT dorman 788-522 nor AGS BLF-36C.
this is so i can replace the brake hard lines along the rear axle in a 2002 Camaro. ******* GM had used one side on the rear axle where the hard line has an M12 male fitting in the center that connects to the flex hose. I can't buy a hard line with an M12 on one end and an M10 on the other, or tell me where i can. I have a replacement line already formed on the axle which has M10x1.0 on each end, so i just need this stupid f'n adapter to move forward. I also don't feel like bubble flaring hard line, i don't have a tool to do it and if i were i don't want to spend more than $10 on it.
