sftaws6

iTrader: (3)

What's up everyone. I got a quick question. I just installed LCA's with relocation brackets. If I'm going to use a pro-kit which height should I put the LCA's at. Right know they are at stock height becuase the springs are not in yet. I was just wondering if I should put them in the middle setting or the lowest setting after installing the springs. Any feedback would be appreciated.

Thanks,
Anthony

Fulton 1

iTrader: (9)

You should use whichever set of holes puts your LCA's as close as possible to parallel with the ground (with the full weight on the suspension). In my case, with BMR bolt-ins and a drop equivalent to ProKit, that meant the lowest set of holes.

2w0s060

I too am using the lowest set of holes with the Pro kit

sftaws6

iTrader: (3)

Thanks guys. I'll try that out.