HELP!!! Can't hook
HELP!!! Can't hook Hey guys I have a 01 ss that I can't get to hook out of the hole the car has a built 60e with 3400 Coan triple disk converter, Mwc adj tounel mnt torque arm,double adj Lcas, single adj rear qa1s , 275/60/15 Mickey et streets
I have my pinion angle at -3
Tire pressure at 13
Torque arm is in the 2 hole from the bottom on the front adj holes
And the shocks are set to the 4th click
Am I doing something wrong and what are u guys doing any help would be greatly appreciated
I have my pinion angle at -3
Tire pressure at 13
Torque arm is in the 2 hole from the bottom on the front adj holes
And the shocks are set to the 4th click
Am I doing something wrong and what are u guys doing any help would be greatly appreciated
It's kind of hard to tell what's going on with your set-up with out seeing a video.
When you say 4th click is that from full soft or full hard?
Is the car hooking at launch then breaking the tires loose?
Tire pressure @ 13PSI shouldn't be an issue.
If everything is right and the car still won't hook control arm relocation brackets could be your solution:
http://umiperformance.com/catalog/in...roducts_id=117
If you need any info or have questions please feel free to call us here at the shop.
Craig
When you say 4th click is that from full soft or full hard?
Is the car hooking at launch then breaking the tires loose?
Tire pressure @ 13PSI shouldn't be an issue.
If everything is right and the car still won't hook control arm relocation brackets could be your solution:
http://umiperformance.com/catalog/in...roducts_id=117
If you need any info or have questions please feel free to call us here at the shop.
Craig
