installing lca's and panhard
Thread Starter
Launching!
Joined: Jun 2013
Posts: 204
Likes: 0
installing lca's and panhard Got a jack for christmas so it's time I finally put this stuff in. It's pretty simple right? just jack up the car and put stands under the axles and do one lca at a time?
for the panhard is it just as simple unbolt it and pop the new one in? it's adjustable and the car is lowered so it will need to be adjusted a little shorter than stock right?
couldn't find a write up on it tried lookin for a couple decent videos on youtube but couldn't find anything there either
for the panhard is it just as simple unbolt it and pop the new one in? it's adjustable and the car is lowered so it will need to be adjusted a little shorter than stock right?
couldn't find a write up on it tried lookin for a couple decent videos on youtube but couldn't find anything there either
Yeah, we keep installation instructions for most of our products up on our website. Here are the links to the instructions that would help you out:
Adjustable panhard bar instructions
http://www.bmrsuspension.com/siteart/install/PHR002.pdf
Lower control arm instructions
http://www.bmrsuspension.com/siteart...ll/MTCA002.pdf
Adjustable panhard bar instructions
http://www.bmrsuspension.com/siteart/install/PHR002.pdf
Lower control arm instructions
http://www.bmrsuspension.com/siteart...ll/MTCA002.pdf
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
