Guys using QA1 (HAL) shocks.....
#1
STF Veteran
Thread Starter
Join Date: Oct 2003
Location: Greensboro, North Carolina
Posts: 3,486
Likes: 0
Received 0 Likes
on
0 Posts
Guys using QA1 (HAL) shocks.....
I bought a set of BMR lowering springs and a set of QA1 (HAL) shocks today (I can only afford the front shocks for now).
Give me some of you guys settings on these shocks/struts and why.
Give me some of you guys settings on these shocks/struts and why.
#3
Sorry man; I'm just looking out of curiousity. I don't have the HAL shocks, so any advice would be coming out of my ignorance (not that its stopped me before... )
Did the shocks ship with installation instructions? I would leave it at the 'middle' setting (number 6?) or the setting it came at, and try it there to start with.
Did the shocks ship with installation instructions? I would leave it at the 'middle' setting (number 6?) or the setting it came at, and try it there to start with.
#4
TECH Addict
iTrader: (11)
Join Date: Jan 2003
Location: Minnesota Corn Fields
Posts: 2,452
Likes: 0
Received 10 Likes
on
9 Posts
I have BMR Springs and QA1's. I have them set at 5 front and 4 rear. Mine are pretty old so new ones might be a little different but that will give you a place to start. However I use the HAL spring up front not the BMR.
#5
STF Veteran
Thread Starter
Join Date: Oct 2003
Location: Greensboro, North Carolina
Posts: 3,486
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by No Juice
I have BMR Springs and QA1's. I have them set at 5 front and 4 rear. Mine are pretty old so new ones might be a little different but that will give you a place to start. However I use the HAL spring up front not the BMR.