What bushing for stock torque arm & BMR relocation crossmember?
03-29-2017, 01:37 PM
#1
What bushing for stock torque arm & BMR relocation crossmember? As the title says, I am looking at the BMR torque arm relocation crossmember. At this point, I plan on running the stock torque arm - I just want to get it off the trans.
What bushing/mount would I need to order for the stock torque arm to mate up to the BMR crossmember?
What bushing/mount would I need to order for the stock torque arm to mate up to the BMR crossmember?
03-29-2017, 01:55 PM
#2
You will need Energy Suspension part number 3.1111R which I have in stock along with the crossmembers 
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
06-01-2017, 03:24 PM
#3
I have the same bmr setup except I have a 4l60e. I set mine to a -2 pinion angle. It had a clunk when it made the 2-3 shift but once I swapped the stock 10 bolt for an S60 that went away. So there is something to be said about the 10 boly slop.