Norbit2

Does anybody actually have the 140-9833 Wilwood Narrow 6 piston brake kit on there 98-2002 Trans Am with the OEM earlier style WS6 wheels. I have posted a pic so there is no confusion. Yes, I know Wilwood has a chart but I would like some first hand experience from those who have installed these. If you needed to use a spacer, how thick? Any pictures?

Blasius02

Just ordered them today for the front and back... pray they fit haha. I'll let you know

Norbit2

That would be awesome! Hope your install goes well.

RAMPANT

iTrader: (17)

Yes they fit, but you need your weights on the outside. Stick ons behind the spoke will hit the caliper. I have photos somewhere. I use the WS6 wheels for winter storage and they do fit. Your wheel bearings better be perfect too. Only about 1/8" or less clear of the spoke.

RAMPANT

iTrader: (17)

Here is a link with a couple pics. https://1drv.ms/f/s!AiGN7xzHDq5vmyrwf9BMJe7NNGjd

Norbit2

Rampant, thank you for the information. The picture link is not working...

I assume a 1/8 spacer between the wheel and the hub would give me plenty of extra clearance? I do plan on replacing the hubs with Stranos X-tracker set up.

Norbit2

I also wounder if "low profile" weights would work on the inside. They are .12" (3mm) thick. That is a hear under 2 penny's.