Suspension & Brakes Springs | Shocks | Handling | Rotors

Stock ride height

Thread Tools
 
Search this Thread
 
Old 07-04-2018, 08:26 PM
  #1  
Launching!
Thread Starter
 
one sweet ws6's Avatar
 
Join Date: Jul 2012
Posts: 282
Likes: 0
Received 0 Likes on 0 Posts
Default Stock ride height

I have a 97 trans am i was wondering if any one new what the factory ride height is suppose to be? I measured my car and the rear the fender to the ground is 28-5/8ish and the front is 26-1/2ish. I talked to kyle at bmr he said with there lowering kit the rear would b 26-3/4 and the front would b 26 so if my front only drops 1/2” does that mean my springs are sagging and wore out. Car only has 27k miles on it but i understand sitting for 21 yrs can probly wear springs out to
Old 07-04-2018, 08:33 PM
  #2  
TECH Senior Member
iTrader: (2)
 
HCI2000SS's Avatar
 
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,145
Likes: 0
Received 15 Likes on 15 Posts
Default

Those springs should be around a 1.2" drop all around from where you're at now. My stockers had about 80k an were 17 years old when I changed them, and I got very close to the advertised drop



Quick Reply: Stock ride height



All times are GMT -5. The time now is 03:56 PM.