Nehs98Ls1T/A

I have a 2000 Trans Am lowered on Strano springs with Koni STR.T shocks. I just got a BMR adjustable torque arm with their relocation crossmember. Im wondering what holes on the crossmember should I mount the bushing. Im going from a tunnel mount to the tranny mount so i just want to get it right the first time around before i start doing the pinion angle.

sjsingle1

iTrader: (1)

follow the 3 bolt holes in the tranny rear housing for the stock mount.....line them up to the plate on the BMR crossmember for a close to stock starting point

hope your BMR works....i have one and could not get it to work....alignment issues