kodiak

iTrader: (1)

Is there a replacement for the upper rubber piece?

FirstYrLS1Z

iTrader: (4)

Are you seeking a replacement or a substitute ?
GM #10290379

kodiak

iTrader: (1)

Replacement or better

FirstYrLS1Z

iTrader: (4)

Did you lose one (or both), normally they never need replacement.
Put an ad in the parts classified 'parts wanted', many replace them with the 'hose mod' for lowering purpose. Someone should have them pulled out.

kodiak

iTrader: (1)

Thanks

quiet_storm98

iTrader: (48)

if you want to lower it slightly but still have an isolator mustang cobra isolators fit on our back springs, that's what i used and it lowers the back like 1/2 an inch

Tyler Dietzenbach

iTrader: (5)

You can also do the heater hose mod. I don't remember the specifics but you take the isolators out and slide a rubber heater hose on the end of the spring. This WILL give you a drop though. It's been a fairly popular mod for these cars for years.