Baer Big Brake Upgrade Install
#1
Baer Big Brake Upgrade Install
Heres a video I put together of my big brake upgrade. There was a couple hiccups but we got it all done. This should help you in the future.
Like. Comment. Subscribe. Let me know if it helped you.
Trending Topics
#9
#10
I made the swap to 18's a long time ago, but I'd need spacers for the 6th gen stuff. I got a deal on used set several years back, but still need rotors
May unload them and go this route
May unload them and go this route
The following 2 users liked this post by chadfarr:
blackbyrd (12-18-2022), Woodylyf767 (12-19-2022)
#12
For a street car, I don't see the need to do the rears. You could simply add a little more aggressive rear pad if you feel the balance is off. If this is for track, that's completely different.
The following users liked this post:
themealonwheels (12-20-2022)
#14
Thanks for sharing all this info and posting the video btw. Nice to see how the install goes.
I may reach out after the holidays and see if they have options for a 9 inch rear end
I may reach out after the holidays and see if they have options for a 9 inch rear end
#15
What did they machine so the rotor didn't contact the backing plate for the rear brakes???
Do you have the detroit speed fender brackets??? I noticed it looked like they lifted your car on the pinch welds.
If your pinch welds aren't mutilated I highly recommend them.
Do you have the detroit speed fender brackets??? I noticed it looked like they lifted your car on the pinch welds.
If your pinch welds aren't mutilated I highly recommend them.
#16
We machined the rear rotor hats so they wouldn’t make contact with the new backing plates.
yeah, the fender brackets are on my list on things to buy but mine are pretty good still. Fenders are still flush.
yeah, the fender brackets are on my list on things to buy but mine are pretty good still. Fenders are still flush.