Sphon LCA's PROBLEM
#1
Sphon LCA's PROBLEM
I have a 2000 WS6 M6.. Problem since changing out the factory LCA with Spohn LCA's.. When Driving down the Highway the Rear of the car feels like I have a bad Passanger Rear shock.. Swapped the Passanger and Driver shock and same results.. Tried loosening the LCA's and still the same.. When I had the Factory LCA's I didnt feel this problem.. Other thing I notice is running on the highway at 70mph.. I will push down on the accel and the car pushes itself over to the left.. if I let off it goes back to normal.. Like rear end is twisting..
Only thing that I can think of is the Weld in Subframes are not installed correctly..
Any advice and Ideas would be great.. Any local shops around Burleson and Fort Worth and Dallas area would be great that wont break the bank that I could take it to see what is the problem..
Only thing that I can think of is the Weld in Subframes are not installed correctly..
Any advice and Ideas would be great.. Any local shops around Burleson and Fort Worth and Dallas area would be great that wont break the bank that I could take it to see what is the problem..
#6
TECH Fanatic
Join Date: Nov 2001
Location: Mi./Al.
Posts: 1,757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SpankysWS6
Problem since changing out the factory LCA with Spohn LCA's.Like rear end is twisting..
Only thing that I can think of is the Weld in Subframes are not installed correctly
Only thing that I can think of is the Weld in Subframes are not installed correctly
Did you install the LCA's and SFC's at the same time, also have you checked to see if there's any problem with the TA?