Question to those who welded their own SFC's in
03-31-2005, 06:08 PM
#1
TECH Fanatic
Thread Starter
Join Date: Oct 2003
Location: Grand Rapids, Michigan
Posts: 1,132
Likes: 0
Received 0 Likes
on
0 Posts
Question to those who welded their own SFC's in Hey guys, I just got my BMR weld in SFC's and i'm going to be doing the welding, so I was wondering how well can you lay into where you weld it to the car?? What I mean is can you really take time and weld a fairly fat bead?? Or should I go faily quick with a smaller bead so I don't burn through?? It's obvious the SFC's them self can take plenty of heat, but i'm not shure about the bottom of the car...lol Thanks!!
04-03-2005, 08:50 PM
#4
TECH Fanatic
Thread Starter
Join Date: Oct 2003
Location: Grand Rapids, Michigan
Posts: 1,132
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, that helps....Thanks! Are those pics from an install guide?? If so do you have a link to the site?? My SFC's didn't come with any directions, so i'm not exactly shure where they mount.
04-03-2005, 10:59 PM
#5
Those pics are from BMR's website here:
http://www.bmrfabrication.com/F-bodyChassis.htm
I've got about 140 SFC pics (I collect all kinds of pics). If you give me an e-mail address I'll send you some of the better pics that show the welds.
jasonw_ward2@hotmail.com
http://www.bmrfabrication.com/F-bodyChassis.htm
I've got about 140 SFC pics (I collect all kinds of pics). If you give me an e-mail address I'll send you some of the better pics that show the welds.
jasonw_ward2@hotmail.com