SLP SFC guys step in
04-02-2005, 08:16 PM
#1
TECH Enthusiast
Thread Starter
Join Date: Dec 2004
Location: Zanesfield, OH
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
SLP SFC guys step in I am going to put my new spl sfc in tomorrow. I would like to know what torques everyone used for the bolts and if you used lock tight on the bolts? I read in the instructions that I have to take a bolt out of the lca, which is fine because I have new LCA's to put on too, so what torque do those need to be when I reassemble? If I could get a list of torques do this job that would be great, subframe bolts and lca bolts.
04-02-2005, 10:35 PM
#2
I used this guide for mine, it has the torque specs there
http://users3.ev1.net/~cnl1/firehawk/subframe/index.htm
I used red loctite for my bolts... HTH!
http://users3.ev1.net/~cnl1/firehawk/subframe/index.htm
I used red loctite for my bolts... HTH!