New big brake setup LT1 (LS1 Wilwood(pic)
#21
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
CAMSS30, I don't think the rear setup for the LS1 is two piece anymore with the internal brake setup. The only reason I say this is because I had that setup a couple of weeks ago and mine was a 1 piece rear. It is my understanding that the two piece rear only comes as an external rear parking brake now. I could be wrong but just wanted to point out what I personally have seen with both kits. This is assuming that someone is running a 12 bolt or 9", it may be different if your still using the stock 10 bolt ?
![Burnout](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_burnout.gif)
#22
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks
![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
Originally Posted by 96silverram
140-7763-D, if you have a 93-97 car this is the part # to the LS1 kit which you will need spindles from a 98-02 LS1 car to make this kit plug & play. Fronts measure 13.15" and the rears 12.19". Also, if you do the rear kit with the external parking brake you will get the added benefit of having a 2 piece rear. The LS1 rear with the internal parking brake is 1 piece
. I just think having the full two piece on the front & rear looks much nicer
.
Hope that helps![Lurk](https://ls1tech.com/forums/images/smilies3/lurk.gif)
![Gay!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_rainbow.gif)
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
Hope that helps
![Lurk](https://ls1tech.com/forums/images/smilies3/lurk.gif)