Suspension & Brakes Springs | Shocks | Handling | Rotors

Losing pressure on my brakes after big cam install any ideas?

Thread Tools
 
Search this Thread
 
Old 01-25-2007 | 09:29 PM
  #21  
Jpr5690's Avatar
TECH Junkie
iTrader: (13)
 
Joined: Nov 2002
Posts: 3,807
Likes: 0
Default

+1 for a ms3 cam and shitty vacc at idle .. i am either gonna go with a vac can, electric pump or a better master cylinder...

being the can is cheep i might as well start there....
Old 01-26-2007 | 05:05 AM
  #22  
DONAIMIAN's Avatar
TECH Senior Member
iTrader: (18)
 
Joined: Jun 2002
Posts: 10,036
Likes: 0
From: NW Houston, TX
Default

This seems to only be a problem with A4 cars. Whats the Idle set at?
Old 01-26-2007 | 10:07 AM
  #23  
Jpr5690's Avatar
TECH Junkie
iTrader: (13)
 
Joined: Nov 2002
Posts: 3,807
Likes: 0
Default

950 Rpms
Old 01-26-2007 | 10:57 AM
  #24  
cowboysfan's Avatar
12 Second Club
 
Joined: Mar 2005
Posts: 1,498
Likes: 0
From: Corpus Christi
Default

read an article awhile back (couple years or so) about vacuum boost for big cams that have little low vacuum. Pontiac 3000 or 2000, dont remember what year but, has a vacuum boost in them from factory, ya'll might want to check that out. I'm sure u can get it from junk yard for about 20 buck's or so. just thought this might help ya'll.



fuerzaws6
Old 01-26-2007 | 06:25 PM
  #25  
Jpr5690's Avatar
TECH Junkie
iTrader: (13)
 
Joined: Nov 2002
Posts: 3,807
Likes: 0
Default

Just Gonna Get A Canister...



Quick Reply: Losing pressure on my brakes after big cam install any ideas?



All times are GMT -5. The time now is 01:16 PM.